External Contact for use on Gates & Doors with the Wireless Smart Alarms.

External Wireless Magnetic Gate & Door Contact, designed to help protect all types of external opening such as:

• Gates.
• Shed Door & Windows.
• Bathroom Windows.

Can be used with all of our Smart DIY Wireless Alarm Systems.

Supplied in two parts (magnetic contact & magnet), and easily fitted using small screws or double sided tape (supplied).
They are fitted onto the gate/door and adjacent frame (towards the hinge end is recommended in most applications), when closed the two halves need to be within .5" each other, when the gate/door is opened a wireless signal is transmitted to the Alarm Receiver.

Powered by 2 x AAA batteries (supplied), which will last between 1 - 2 years in normal operation (depending on use), if a low battery situation arises the built in LED will flash red slowly giving ample indication to change the battery.

The wireless transmission range back to any of the Smart Wireless Alarm Receivers is an impressive 450 ft (line of sight). 

This model is weatherproof, ideal for use on Gates, Fuel Tank Lids, Shed & Garage Doors etc !! 

• 1 x Magnetic Contact.
• 1 x Magnet.
• 1 x Set of mounting screws.
• 1 x Mounting double sided tape.
• 2 x AAA batteries.

• Frequency: 868 Mhz.
• Wireless Transmission Distance: 450 ft (line of sight).
• Power: 2 x AAA batteries (supplied).
• Distance required in the closed position: 0 - .5".
• Mounting Method: Screws or Double Sided Tape (supplied).
• Size of Magnetic Contact: 3.4" x 1.6" x 1.3".
• Size of Magnet: 2.2" x .5" x 1.3".
• Side of Operation of Switch: Both Sides.
• Battery Life: 1 - 2 years (normal operation, depending on usage).
• Low Battery Warning: Yes (slow red flashing LED on the magnetic contact).
• External Use: Yes.