Internal PIR for the Wireless Smart Alarm
Internal Wireless Smart Alarm PIR, detects people from up to 45 ft distance & 110 degrees angle, with a wireless transmission range of 450 ft (line of sight) back to the Control Panel.
Recipient :
* Required fields
or Cancel
005-3520
New
Internal Wireless Smart Alarm PIR, detects people from up to 45 ft distance & 110 degrees angle, with a wireless transmission range of 450 ft (line of sight) back to the Control Panel.
This product is no longer in stock
Availability date:
Internal Wireless Smart Alarm PIR, detects movement from people from up to 45 ft distance & 110 degrees angle, together with a wireless transmission range back to any of the Smart Control Panels of 450 ft (line of sight).
Powered by a single PP3 battery (supplied) and supplied with a fully adjustable mounting bracket.
The battery will operate for between 12 - 18 months in most applications (depending on use) and has a built in low battery warning (a slow flashing red LED on the PIR) allowing for suitable battery replacement. The built in power saving technology puts the PIR into hibernation for 3 minutes after each activation.
There is no limit to how many additional PIR's can be added to our range of Wireless Smart Alarms.
Mounting the PIR Sensor:
The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:
1) Mount the PIR into a corner of a room.
2) Avoid heat spots from bright lamps suddenly turning on or off.
3) Do not install immediately above a radiator.
4) Do not install in a glass roof conservatory.
External Wireless Magnetic Door/Window Contact, designed to help protect all types of opening Gates & External or Damp Door & Windows, for use with our Smart Wireless Alarm Systems.
Wireless Remote Control, for arming and disarming your Wireless Smart Alarm, from up to 150 ft away.
Wireless Water Detector, designed to monitor for Water Leaks & Floods, works in conjunction with all of our Wireless Smart Alarm Systems.
Wireless Security Floor Pressure Mat, designed to be placed underneath a doormat, when anyone stands on the doormat, a wireless signal is transmitted back to a Wireless Siren.
Dummy Alarm Siren & Flashing LED, exactly matching the fully operational Wireless Smart Alarm Siren, ideal addition to any Alarm Installation, or used as a simply deterrent on any building.
Wireless Smart Alarm Vibration Sensor, designed to detect Door & Windows being forced open, activates the Alarm before entry has been achieved, for use with our Smart Wireless Alarm Systems.
Outdoor Wireless PIR for use with the complete range of Smart Wireless Alarms, supplied with a protective rubber hood which results in a tighter detection pattern helping it avoid false alarms from small animals.
A protective Steel Cage A designed to help protect various Security devices from Damage or Theft.
PIR (passive infra-red detector)
All PIR sensors detect changes in infra-red radiation, in the form of heat emitted by a number of bodies including people, cars and to a lesser extent, dogs or other small animals. The bigger the body, the more infra-red radiation isemitted and the easier it is for a PIR sensor to detect.
If you imagine the images shown on television of a Police Helicopter following a suspect in the pitch black using night vision technology or a Soldier looking through night vision binoclulars in the middle of the night, this is exactly how the PIR is working.