Smart Battery Wireless Siren Vibration Alarm.

For locations with no easy or safe access to a power supply, this Smart Battery Powered Wireless Siren & Flashing Strobe doubles up as the Alarm Control Panel, making it an easy & quick Alarm to install (in any location), operates on 868 Mhz. 

Supplied with a Wireless Vibration Sensor & Remote Control, can be used as:

• A small Alarm system (to help protect vulnerable doors & windows in workshops, garages, holiday homes etc).
• A wireless Fuel Tank Alarm (fitted onto a tight fitting lid). 
• Or as a base to build a more comprehensive system (adding any of the smart alarm detectors, no limit). 

The Alarm is operated using Remote Control (supplied) or additional Remote Controls or Wireless Keypads.

The Wireless Vibration (Shock) Sensor is designed to detect Door/Windows or Lids being forced open, resulting in an Alarm activation before entry has been achieved.  

The transmitter is powered by 2 x AAA batteries and is fitted near to the window or door by screws or double sided tape (both supplied). The batteries, which will last between 1 - 2 years in normal operation (depending on use), if a low battery situation arises the built in LED will flash red slowly giving ample indication to change the battery.

The vibration sensor is attached to the transmitter by 10" of thin cable and is fixed to the door or window by a double sided tape pad (supplied), it is designed to monitor for sudden vibrations.  

The wireless transmission range back to the Smart Wireless Siren/Receiver is an impressive 600 ft (line of sight). 

The Wireless Remote Control, for arming and disarming your Wireless Smart Alarm (from up to 150 ft away), it can carry out 3 functions with this system:

1. Arm: Fully Arms the Alarm System.
2. OFF: This will disarm the complete Alarm System.
3. Panic: By pressing the Home & Alert Buttons at the same time, it will fully activate the Siren (even when it is disarmed).

The Siren/Control Panel is powered by 4 x D Cell Batteries (supplied), which will last approximately 2 years, makes the installation very quick, easy & safe (optional plug in transformer available for locations that have easy and safe access to a power supply socket).

When activated it has twin Sirens supplying 120 Decibel & bright Flashing Strobe Lights, the duration of these can be adjusted between 1 - 10 minutes during installation.

The Siren has other features including:

• Tamper Protection.
• Service Mode (allows customers to silence alarm for any service operations, remote control required).
• Easy to follow installation instructions.

Also available is a matching Dummy Siren Box, normally fitted to the rear of the property !!

Wireless Siren, Strobe & Receiver:

• 1 x Siren, Strobe & Built in Control Panel.
• 1 x Backing Plate.
• Built in Flashing Strobes.
• 4 x D Cell Batteries.
• 1 x Manual.

Vibration Sensor:

• 1 x Wireless Transmitter.
• 1 x Shock Sensor.
• 1 x set of mounting screws.
• 1 x mounting double sided tape.
• 2 x AAA batteries.

Remote Control:

• 1 x Remote Control
• 1 x Battery.
• 1 x Chain & Ring for Key Ring.

Wireless Siren, Strobe & Receiver:

• Frequency: 868 Mhz.
• Operational Method: Remote Control or Wireless Keypad (or both).
• Works with all Wireless Smart Alarm Detectors.
• Limit of Detectors Used: No Limit.
• Limit of Remote Controls & Keypads: No Limit.
• Tamper Switch: Yes.
• Flashing Strobes: Yes (during activation).
• Siren Output: 120 Decibel.
• Power Supply: 4 x D Cell Batteries (supplied).
• Battery Life: 2 Years (normal operation).
• Mains Power: Optional Plug in Transformers.
• Service Mode: Yes (remote control required).
• Siren Duration: Adjustable in Installation & Service (1 - 10 minutes).

 Remote Control:

• 3 modes of Operation 
• Arm: Fully Arms the Alarm System.
• OFF: This will disarm the complete Alarm System.
• Panic: By pressing the Home & Alert Buttons at the same time, it will fully activate the Alarm Systems (even when the alarm is disarmed), this is very popular for keeping inside the bedroom at night.
• Frequency: 868 Mhz.
• Power Supply: 1 x 12v Battery (MN27)
• Size: 2.25" x 1.25" x .5".
• Operating Distance: 150 ft (line of sight).
• Max Number of Remote Controls Per Alarm System: 99

 Wireless Vibration Sensor:

• Frequency: 868 Mhz.
• Wireless Transmission Distance: 600 ft (line of sight).
• Power: 2 x AAA batteries (supplied).
• Mounting Method: Screws or Double Sided Tape (supplied).
• Size of Transmitter: 3.4" x 1.5" x .5".
• Size of Shock Sensor; 1.5" x 1.5" x .25".
• Length of Joining Cable: 10" (could be lengthened).
• Battery Life: 1 - 2 years (normal operation, depending on usage).
• Low Battery Warning: Yes (slow red flashing LED on the magnetic contact).

Siren Battery Level Test:

• Press Alert Symbol on the Remote Control.
• The Siren will Beep once.
• An LED Light will then illuminate (if it is flashing the batteries are getting low, if it is steady the battery is good.