Silent Workshop GSM Wireless Alarm System 4

Silent Workshop GSM Wireless Alarm 4 supplied with:

• 1 x Wireless Magnetic Contact (protects doors or windows).
• 1 x Wireless Pet Friendly PIR (ideal for workshops).
• 1 x Wireless Roller Shutter Door Contact.
• 2 x Remote Controls (for arming & disarming the alarm).
• 2 x Control Panel Keys.

The Alarm will contact key-holders by Cell Phone & Text Message if triggered, without making any noise on site (unless a siren is added).

This kit is ideal for slightly larger buildings, but additional Wireless accessories can still be added to suit your exact requirements, the options include:

• Additional Door & Window Contacts.
• Standard PIR's.
• Pet Friendly PIR's (ideal for buildings which may have occasional small animals present).
• Curtain PIR's (for installation behind a Patio Door or Window).
• Vibration Sensors.
• Roller Shutter Door Contacts.
• Smoke & Heat Detectors.
• Water or Flood Sensors.
• Staff Safety Buttons.
• Wired or Wireless Internal & External Sirens. 

CLICK HERE FOR ALL ACCESSORIES !!

Door Contact:

The Wireless Door Contact is supplied in two parts (magnetic contact & magnet), and easily fitted using small screws & double sided. They are fitted onto the door/window and adjacent frame (towards the hinge end is recommended in most applications), when closed the two halves need to be within .5" of each other, when the door/window is opened a wireless signal is transmitted to the Alarm Receiver. Powered by 2 x AAA batteries (supplied), and can be fitted up to 150 ft (line of sight) away from the control panel.

Pet Friendly Wireless PIR:

These PIR's are designed to detect animals weighing over 22 lb, ideal for workshops and similar building which may have the occasional Bird or Rodent present. Powered by a standard 9v PP3 battery and can be fitted up to 150 ft (line of sight) away from the control panel, they have a 30 ft & 110 degrees detection pattern.  

Although these PIR's are designed to avoid detection of animals of below 22 lb, please keep in mind that if you have more than one small animal present, they could trigger the sensor as their collective body heat may total more than the 22 lb KG settings. If in doubt consider using Magnetic Contacts & Vibration Sensors on risk doors & windows. 

Roller Shutter Door Contact:

The Wireless Roller Shutter Door Contact works in the same way as the door contact, but they are supplied with heavy duty steel contacts as they will often be installed onto the floor. The Wireless transmitter is connected by a short length of armoured cable allowing it to be fitted out of the way.

Communication:

No telephone line is required on site as the Alarm System communicates using a standard size mobile phone sim card (pay as you go or contract, not supplied as standard), and is powered by a plug in transformer supplying 12v DC, it can also be used with battery & solar power in locations with no or limited mains supply.

The Heavy Duty Control Panel is housed in a steel case making it ideal for applications such as Workshops, Farm Buildings, Garages and all types of Business premises.

The Alarm can be Armed & Disarmed by using:

• Remote Controls (2 supplied, additional available).
• Built in Keypad.
• Built in Timer.
• Text Message.

This versatile Alarm has many other features to help make it suitable for your applications, these include:

• 16 x Wired Inputs: (can be used with hard wired detectors, or connected to existing systems).
• 16 x Wireless Zones: (more than enough capacity to add many additional detectors & sensors)
• Screw on Aerial: (allows us to offer a aerial extension for locations with a poor mobile phone signal).
• Delay Entry & Exit: (allows you to program an delay Entry or Exit delay (0 - 90 seconds).
• Tamper Switch on the Control Panel.
• Mains Power Failure: (this optional feature will contact the primary key-holder by text message if the power supply fails for more than 30 minutes whilst the Alarm is Armed).
• Two Way Communication: (allows two way communication with the control panel).
• Personalized Text Message (the alarm can be programmed to identify the zone that has been triggered by a personalized text message).
• Programming Method: (easy by using the built in keypad or text message).
• 12v DC Power Supply: (allows the alarm to be used with a leisure battery, with possible solar charging). 
• Key Entry: (to access the control panel).
• You can double the operation range between the sensors & control panels by adding a signal repeater, part number 005-0760, ideal for large workshops.

A great Alarm for all types of commercial applications, contact us if you need advice.

• 1 x Heavy Duty KP Silent GSM Alarm panel with Built in back-Up Battery.
• 1 x Magnetic Door Contact & 2 x AAA batteries.
• 1 x Wireless Pet Friendly PIR & Battery.
• 1 x Wireless Roller Shutter Door Contact.
• 2 x Remote Controls with Battery.
• 1 x Plug in Power Supply.
• 2 x Keys: (for access to the control panel).

Heavy Duty KP Control Panel:

• Heavy Duty: (steel panel).
• Two Aerials: (detachable and extendable).
• Telephone Calls: (up to five telephone numbers can be called).
• Text Message: (will send up to 3 text messages when triggered).
• Built in Power Failure: (will send a text message to the main key-holder if the power fails, either instantly or after 30 minutes, optional use).
• 12v DC Input: (suitable for solar & battery applications).
• 16 x Wired Zones (fully adjustable).
• 16 x Wireless Zones (fully adjustable).
• System can be Armed & Disarmed by Built in Keypad, Remote Control, Self Timer & Text Message).
• Self Monitoring Mode: (optional use).
• 4 Minute Output Relay: (relay when the alarm is triggered, can operate sirens, lights, telephone dialers).
• 12v DC Output: (when triggered).
• Switch 4 Minute Relay: (can be used for the key-holder to switch on lights etc).
• Large selection of additional alarm accessories.
• Can be used as a GSM Dialler.
• Lockable Control Panel.
• Front Panel Tamper Switch.
• Sirens: (can activate external wired & wireless sirens).
• Size: 9" (w) x 6.25" (h) x 2" (d).
• Frequency: 433 Mhz.

Wireless Siren:

• Size of Siren: 12" (H) x 8.5" (W) x 2.4" (D).
• Power Supply: 12v 1 amp Plug in Transformer.
• Backup Battery: Yes (7v Lithium).
• Siren: 120 Decibel.
• LED in Standby: Yes (slow).
• Strobe when activated: Yes (Rapid).
• Tamper Switch: Yes (rear & side).
• Wireless Range between the Siren & Transmitter: 300 ft (line of sight).
• Wireless Signal: From Transmitter inside the control panel.

Pet Friendly PIR:

• Size of PIR (without bracket) :4" (H) x 3" (W) x 1.75" (D).
• Size of PIR (with bracket): 4" (H) x 3" (W) x 3" (D) mm.
• Detection Range: 30 ft.
• Detection Angle: 110 Degrees.
• Pet Immune: under 22 lb (in normal use).
• Power Supply: 1 x PP3 Battery.
• Battery Life: Approximately 9 - 12 months (normal use).

Mounting the PIR Sensor:
The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:

1) Mount the PIR into a corner of a room.
2) Avoid heat spots from bright lamps suddenly turning on or off.
3) Do not install immediately above a radiator.
4) Do not install in a glass roof conservatory.

Magnetic Contact:

• Switch Size: 4" (L) x 1.4" (W) x 1" (D).
• Magnet Size: 2.4" (L) x .4" (W) x .75" (H).
• Battery Type: 2 x AAA.
• Battery Life: 12 - 24 months (normal use).
• Installation Method:
• Switch: Double sided tape & 2 small screws.
• Magnet: Double sided tape & self 2 screws.

Roller Shutter Door Contact:

Dimensions:

• Magnetic Switch: 4" (L) x 1.5" (W) x .4" (D).
• Magnet: 4" (L) x .5" (W) x .5" (D).
• Internal Transmitter: 2.75" (L) x 1.5" (W) x 1.5" (D).
• Armoured Cable between the Transmitter & Switch 12".

Installation Method:

1. Fit the magnetic switch onto a door frame.
2. Fit the magnet onto the door (both the magnet and switch need to be nearly touching when the door is closed).
3. Mount the battery powered transmitter onto a suitable surface using either double sided tape (supplied) or screws (not supplied).

Battery Specification:

• Battery: 1 x 12v MN21.
• Battery Life: 12 months (normal use).

Remote Control Specification:

• Size: 2.2" (L) x 1.2" (W) x .4" (D) mm.
• Battery Life: 1 - 3 years (normal use).
• Battery Type: 12v MN27.
• Transmission Distance: 150 ft (line of sight).