Workshop GSM Wireless Alarm System 2

Workshop GSM Wireless Alarm 2 supplied with:

• 1 x Wireless Magnetic Contact (protects doors or windows).
• 1 x Wireless Roller Shutter Door Contact.
• 1 x 118 Decibel Wired Siren (can be used indoors or outdoors).
• 2 x Remote Controls (for arming & disarming the alarm).
• 2 x Control Panel Keys.

The Alarm will contact key-holders by Cell Phone & Text Message if triggered.

This kit can be used as it is for buildings with just two entrances, or with many other optional Wireless accessories built to suit your exact requirements, the options include:

• Additional Door & Window Contacts.
• Standard PIR's.
• Pet Friendly PIR's (ideal for buildings which may have occasional small animals present).
• Curtain PIR's (for installation behind a Patio Door or Window).
• Vibration Sensors.
• Roller Shutter Door Contacts.
• Smoke & Heat Detectors.
• Water or Flood Sensors.
• Staff Safety Buttons.
• Wired or Wireless Internal & External Sirens. 

CLICK HERE FOR ALL ACCESSORIES !!

Door Contact:

The Wireless Door Contact is supplied in two parts (magnetic contact & magnet), and easily fitted using small screws & double sided. They are fitted onto the door/window and adjacent frame (towards the hinge end is recommended in most applications), when closed the two halves need to be within .5" of each other, when the door/window is opened a wireless signal is transmitted to the Alarm Receiver. Powered by 2 x AAA batteries (supplied), and can be fitted up to 150 ft (line of sight) away from the control panel.

Roller Shutter Door Contact:

The Wireless Roller Shutter Door Contact works in the same way as the door contact, but they are supplied with heavy duty steel contacts as they will often be installed onto the floor. The Wireless transmitter is connected by a short length of armoured cable allowing it to be fitted out of the way.

Wired Siren:

The compact 118 Decibel wired Siren is supplied with 10 ft of cable (which can be extended) and can be mounted Internally or Externally, it will activate for 3 minutes each time the Alarm is triggered (unless turned off by a key-holder).

Communication:

No telephone line is required on site as the Alarm System communicates using a standard size mobile phone sim card (pay as you go or contract, not supplied as standard), and is powered by a plug in transformer supplying 12v DC, it can also be used with battery & solar power in locations with no or limited mains supply.

The Heavy Duty Control Panel is housed in a steel case making it ideal for applications such as Workshops, Farm Buildings, Garages and all types of Business premises.

The Alarm can be Armed & Disarmed by using:

• Remote Controls (2 supplied, additional available).
• Built in Keypad.
• Built in Timer.
• Text Message.

This versatile Alarm has many other features to help make it suitable for your applications, these include:

• 16 x Wired Inputs: (can be used with hard wired detectors, or connected to existing systems).
• 16 x Wireless Zones: (more than enough capacity to add many additional detectors & sensors)
• Screw on Aerial: (allows us to offer a aerial extension for locations with a poor mobile phone signal).
• Delay Entry & Exit: (allows you to program an delay Entry or Exit delay (0 - 90 seconds).
• Tamper Switch on the Control Panel.
• Mains Power Failure: (this optional feature will contact the primary key-holder by text message if the power supply fails for more than 30 minutes whilst the Alarm is Armed).
• Two Way Communication: (allows two way communication with the control panel).
• Personalized Text Message (the alarm can be programmed to identify the zone that has been triggered by a personalized text message).
• Programming Method: (easy by using the built in keypad or text message).
• 12v DC Power Supply: (allows the alarm to be used with a leisure battery, with possible solar charging). 
• Key Entry: (to access the control panel).
• You can double the operation range between the sensors & control panels by adding a signal repeater, part number 005-0760, ideal for large workshops.

A great Alarm for all types of commercial applications, contact us if you need advice.

• 1 x Heavy Duty KP GSM Alarm panel with Built in backup Battery.
• 1 x Commercial Magnetic Door Contact & 2 x AAA batteries.
• 1 x Wireless Roller Shutter Door Contact & Battery.
• 1 x Wired 118 Decibel Siren & 10 ft of Cable.
• 2 x Remote Controls with Battery.
• 1 x Plug in Power Supply.
• 2 x Keys: (for access to the control panel).

Heavy Duty KP Control Panel:

• Heavy Duty: (steel panel).
• Two Aerials: (detachable and extendable).
• Telephone Calls: (up to five telephone numbers can be called).
• Text Message: (will send up to 3 text messages when triggered).
• Built in Power Failure: (will send a text message to the main key-holder if the power fails, either instantly or after 30 minutes, optional use).
• 12v DC Input: (suitable for solar & battery applications).
• 16 x Wired Zones (fully adjustable).
• 16 x Wireless Zones (fully adjustable).
• System can be Armed & Disarmed by Built in Keypad, Remote Control, Self Timer & Text Message).
• Self Monitoring Mode: (optional use).
• 4 Minute Output Relay: (relay when the alarm is triggered, can operate sirens, lights, telephone dialers).
• 12v DC Output: (when triggered).
• Switch 4 Minute Relay: (can be used for the key-holder to switch on lights etc).
• Large selection of additional alarm accessories.
• Can be used as a GSM Dialler.
• Lockable Control Panel.
• Front Panel Tamper Switch.
• Sirens: (can activate external wired & wireless sirens).
• Size: 9" (w) x 6.25" (h) x 2" (d).
• Frequency: 433 Mhz.

Magnetic Contact:

• Switch Size: 4" (L) x 1.4" (W) x 1" (D).
• Magnet Size: 2.4" (L) x .4" (W) x .75" (H).
• Battery Type: 2 x AAA.
• Battery Life: 12 - 24 months (normal use).
• Installation Method:
• Switch: Double sided tape & 2 small screws.
• Magnet: Double sided tape & self 2 screws.

Roller Shutter Door Contact:

Dimensions:

• Magnetic Switch: 4" (L) x 1.5" (W) x .4" (D).
• Magnet: 4" (L) x .5" (W) x .5" (D).
• Internal Transmitter: 2.75" (L) x 1.5" (W) x 1.5" (D).
• Armoured Cable between the Transmitter & Switch 12".

Installation Method:

1. Fit the magnetic switch onto a door frame.
2. Fit the magnet onto the door (both the magnet and switch need to be nearly touching when the door is closed).
3. Mount the battery powered transmitter onto a suitable surface using either double sided tape (supplied) or screws (not supplied).

Battery Specification:

• Battery: 1 x 12v MN21.
• Battery Life: 12 months (normal use).

Remote Control Specification:

• Size: 2.2" (L) x 1.2" (W) x .4" (D) mm.
• Battery Life: 1 - 3 years (normal use).
• Battery Type: 12v MN27.
• Transmission Distance: 150 ft (line of sight).

Siren:

• Current Rating: 310 mA.
• Voltage: 12v DC.
• Length: 4".
• Width: 3.75".
• Sound Level: 118 dB.
• Colour: Black.
• Duration: 3 minutes (unless switched off by key-holder).