Twin Push Button Wireless Commercial Bell Kit with additional Chime Receiver

Twin Doorbell Wireless Commercial Bell Kit (with an adjustable loud bell) & additional Chime Receiver

006-3390

New

Wireless Commercial Protect-800 Bell Kit comprising of 2 x Battery Powered 2400 ft Push Buttons, a unique Wireless Outdoor Receiver (with fully adjustable output durations), a Loud Ringing Bell & a additional Internal Chime Receiver. Ideal for Warehouses, Offices and other commercial applications.

More details

Please note: out of stock

$532.43

(excluding all taxes)
100% secure payment
Wireless Commercial Protect-800 Bell Kit comprising of 2 x Battery Powered 2400 ft Push Buttons, a unique Wireless Outdoor Receiver (with fully adjustable output durations), a Loud Ringing Bell & a additional Internal Chime Receiver. 

Ideal for Warehouses, Offices and other commercial applications.

The duration of the Bell is fully adjustable and controlled using a special long range Remote Control. When Armed the Bell will trigger for the chosen duration when either Push Button has been pressed, you can also trigger the Bell at any time using the SOS Button on the Remote Control.

The additional 4 channel Chime Receiver has Volume Control, simple ON/OFF Button, a choice of 32 Chimes or Sirens and is ideal for using in a separate office or building to the Bell. You can have the two Push Buttons operating on different channels and chimes allowing you to know which Push Button has been pressed.

Push Buttons:

The Transmission range between the Battery Push Buttons & both Receivers  is 2400 ft (line of sight), which equates to around 1000 - 1500 metres in most applications.

Further Push Buttons (006-3130) can still be added to cover different entrances, these are powered by a 3v CR123A Battery (supplied) which would last 12 - 18 months in most applications.

The Push Buttons are weatherproof (IP56), if it is to be exposed to extreme weather or to potential vandalism we recommend adding a H/D Push Button

How it Works:

When either Push Button is pressed a Wireless signal is transmitted to the Indoor & Outdoor Receiver, if the Outdoor Receiver is in the Armed status then the Loud 85 Decibel Bell will activate for the chosen duration (this can be turned off by the owners or staff before the duration has elapsed by using a special long range (2400 ft) remote control.

The owner or staff could also trigger the Bell using the SOS Button on the Remote Control (supplied) in the event of a Medical or Security emergency, in these situations the Bell will stay latched ON until it is turned OFF using the special remote control which can be a useful additional Safety procedure (more remote controls can be added). It is also possible to connect a different sounding Siren on channel two for use in Medical or Security emergencies.

The fully weatherproof Outdoor Receiver is powered by a Plug in 12v Transformer (the cable can enter the box through waterproof glands at the bottom or from the rear panel) and controlled by a special long range (2400 ft) Remote Control.

The Internal Chime Receiver (004-4110) works regardless of if the Bell Receiver is turned ON or OFF and will identify which Push Button has been pressed.

Duration:

The duration of the Bell is fully adjustable (by selecting combinations of the internal dip-switches) from 1 seconds to Latched ON, the full list is as below:

  • 1 second or minute.
  • 3 seconds or minutes.
  • 10 seconds or minutes.
  • 15 seconds or minutes.
  • 20 seconds or minutes.
  • 30 seconds or minutes.
  • Latched ON (until disarmed using the remote control).

Outdoor Receiver:

The Outdoor Receiver has two channels with a 12v Output, each channel can be operated by up to four Protect-800 Sensors, these include:


Remote Control:

The specially designed remote control supplied with this Outdoor Receiver has the following features:

  • Arm & Disarm either channel on the Outdoor Receiver.
  • Trigger a optional SOS button which would activate the connected accessories (regardless of if the receiver is disarmed) which could be a Siren, Buzzer, Floodlight or any 12v DC device. This device would latch on until the OFF Button is pressed on any Remote Control paired to the Receiver. 

The Remote Control has an intelligent Feedback LED Indicator which confirms that the signal you have sent to the Outdoor Receiver is successful.

Additional Remote Controls can be added (there is no limit).

The operating distance between the Remote Control & Outdoor Receiver is 2400 ft (line of sight) which relates to around 1000 - 1500 ft in most applications. This allows you to Disarm the Receiver from most locations within the business.

Powered by two standard AAA Batteries (supplied).

Indoor Receiver:

The 4-channel Wireless Receiver is packed with features to help you monitor & protect your Home & Business, these features include:
  • 2400 ft Wireless Reception.
  • Adjustable Volume (from low to approximately 85 decibel).
  • 32 optional Melodies.
  • Mains Powered using a Plug in Transformer (3-pin UK & 2-pin European supplied).
  • Optional Battery Back Up using 4 x AAA Batteries (not supplied).
  • LED Notification of Loss of Mains Power.
  • Low Battery Notification.
  • Up to 16 Detectors can be Used.
  • Multiple Receivers can be used (no limit).
  • Zone Indicator (visual and by chime).
  • 4 x Dry Relay Outputs (can be used to trigger Diallers, Flashing LED's, Siren's, Bells etc).
  • 12v DC Output (can be used to trigger Flashing LED's, Siren's, Bells etc).
  • Relay Duration: Momentary.
  • 12v DC Output with adjustable Duration (5, 30 & 60 seconds or 10 minutes).
  • Can be Wall or Desk Mounted.
  • PIR Battery Check.
  • Optional Pause Modes.
You can add additional Indoor Receivers (004-4110) to this system allowing you to have notification in multiple rooms or buildings. 
This is a unique Wireless Bell System which can be adapted for many applications !!
If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Outdoor Receiver (P800-WSR/1) & Power Supply.
  • 1 x Remote Control (P800-WSK/1).
  • 2 x AAA Batteries.
  • 2 x MT Transmitters.
  • 1 x Set of Screws.
  • 1 x 85 Decibel Bell.
  • 1 x Indoor Chime Receiver & Power Supply.

Outdoor Receiver:

  • Weatherproof: Yes.
  • Power Supply: 12v 5 amp DC.
  • Weatherproof Cable Entry Glands: Yes.
  • Channels: 2.
  • Sensors per Channel: 4.
  • Operating Range: 2400 ft (line of sight).
  • Arming & Disarming Method: Remote Control.
  • 12v DC Outputs: 2.
  • Output Duration:
    • 1 second or minute.
    • 3 seconds or minutes.
    • 10 seconds or minutes.
    • 15 seconds or minutes.
    • 20 seconds or minutes.
    • 30 seconds or minutes.
    • Latched ON (until disarmed using the remote control).
  • Duration Selection: Internal Dip-switches.
  • Size: 6 3/4" x 5" x 2 3/8".

Remote Control:

  • Operation:
    • Channel 1 Arm, Disarm & SOS.
    • Channel 2 Arm, Disarm & SOS.
  • Power Supply: 2 x AA Batteries (supplied).
  • Size: 3 3/8" x 1 1/2" x 1".
  • Transmission Range: 2400 ft (line of sight).
  • Multiple Remote Control Operation: Yes (no limit).
  • Feedback Indicator: Yes (it confirms a successful operation).
  • Wall Bracket: Yes (supplied).

Push Buttons:

  • Wireless Range: 2400 ft (line of sight).
  • Power Supply: 1 x 3v Lithium CR123A Battery (not supplied if purchased on it own due to shipping rules regarding Lithium Batteries).
  • Battery Life: 12 - 18 months (most applications).
  • Size with Wall Bracket: 3 1/2" x 1 3/4" x 1 1/4".
  • Colour: White.
  • Activation Methods: Push Button.
  • IP: Yes (56).
  • Mounting Methods:
    • Wall.
    • Optional Belt & Pocket.
    • Optional Lanyard.

Bell:

  • Power Supply: 12v DC.
  • External: Yes.
  • Size: 6" x 2.4".
  • Mounting Bracket: 4 x Holes.
  • Volume: Approx 85 Db.

Indoor Receiver:

  • Wireless Operating Range: 2400 ft (line of sight).
  • Adjustable Volume: Yes (from low to approximately 85 decibel).
  • Melody Options: 32.
  • Power Supply: 2-pin U.S  Transformer Supplied.
  • Battery Backup: Yes 4 x AAA Batteries (not supplied).
  • Loss of Mains Power Notification: Yes (LED).
  • Low Battery Notification: Yes.
  • Maximum Number of Detectors Can Be Used: 16.
  • Multiple Receivers can be used: Yes (no limit).
  • Zone Indicator: Yes (visual and by chime).
  • Dry Relay Outputs: 4 (N/O & N/C Momentary).
  • 12v DC Output with adjustable Duration (5, 30 & 60 seconds or 10 minutes).
  • Relay Duration: Momentary.
  • Mounting Method: Wall or Desk Mounted.
  • PIR Battery Check: Yes.
  • Optional Pause Modes: Yes.
  • Input Voltage: 12v DC 500 mA.