Wireless Flood Alarm 2 - Protect-800
Unique Protect-800 Wireless Flood Alarm 2 comprising of a Float Switch housed within a plastic box, a Battery Wireless Transmitter, an Outdoor Receiver with a Remote Control and a Siren & Flashing Strobe.
Recipient :
* Required fields
or Cancel
008-1910
New
Unique Protect-800 Wireless Flood Alarm 2 comprising of a Float Switch housed within a plastic box, a Battery Wireless Transmitter, an Outdoor Receiver with a Remote Control and a Siren & Flashing Strobe.
This product is no longer in stock
Availability date:
The Float Switch is connected to the battery powered Wireless Transmitter by 3 metres of Cable positioning it well above Flood Water, the Transmitter is housed inside a waterproof plastic mounting box.
The Outdoor Receiver is powered by a 12v DC plug in transformer (the cable can enter the box through waterproof glands at the bottom or from the rear panel) and is fully weatherproof so can be mounted inside or outside of a building, connected to this Receiver is a Wired Siren & Flashing Strobe. The Receiver is Armed & Disarmed using a long range 2400 ft Remote Control supplied (more can be added).
The duration of the Siren (when triggered) is fully adjustable from seconds, minutes to latching, in Flood Alarms we would normally recommend a latching Siren. The Siren can be turned of at any time by using the long range Remote Controls.
There are many Protect-800 Sensors that could be added, these include:
The operating range between these Sensors & the Receiver are all 2400 ft (line of sight) which equates to around 1000 - 1500 ft in most applications.
Duration:
The duration of the 12v DC Outputs is fully adjustable (by selecting combinations of the internal dip-switches) from 1 seconds to Latched ON, the full list is as below:
Remote Control:
The specially designed remote control supplied with this Outdoor Receiver has the following features:
The Remote Control has an intelligent Feedback LED Indicator which confirms that the signal you have sent to the Outdoor Receiver is successful.
Additional Remote Controls can be added (there is no limit).
The operating distance between the Remote Control & Outdoor Receiver is 2400 ft (line of sight) which relates to around 1000 - 1500 ft in most applications. This allows you to Disarm the Receiver before passing through a Protect 800 Detector, or Arming the Receiver after leaving the premises.
Powered by two standard AAA Batteries (supplied).
Hard Wired 118 6-tone Decibel Siren.
Recordable Speech Warning Alarm, replay a warning or safety message to visitors, adjustable volume control up to 100 Decibels.
Compact wired 100 Decibel Siren & Flashing Strobe for use with a wide range of Security & Safety Products.
Loud External or Internal 12v DC Bell for use with many of our Long Range Wireless Bell & Wireless Driveway & Perimeter Alarms.
Blue Flashing Strobe Light, for use with many types of Security & Safety Systems.
Red Flashing Strobe Light, for use with many types of Security & Safety Systems.
Additional 4-channel Wireless Receiver for the Long Range Protect 800 Wireless Driveway Alert.
Additional PIR with New multiple Lens Caps for the Protect 800 Wireless Driveway Alert.
Additional PIR located inside a wooden Bird box for the Protect 800 Wireless Driveway Alert.
Long Range Battery Powered Wireless (2400 ft) Multi Use Transmitter for the Protect 800, supplied with a Wall Bracket, Belt Clip, Lanyard or can be used as a Circuit Board only to cover many applications (requires a suitable receiver).
Long Range Battery Powered Wireless (2400 ft) Transmitter Board with a N/O Input mounted inside a Weatherproof Box, for use with the Protect 800 series.
Weatherproof Panic Button assembly with a 'SOS' logo supplied with a built in 2400 ft 'V Range' Wireless Transmitter for use with our Wireless Protect 800 Alarms & Alerts.
Long Range Battery Powered Wireless (2400 ft) Gate or Roller Shutter Door Contact for use with the Protect 800 Alarms.
Disabled Toilet Long Range (2400 ft) Wireless Pull Cord Transmitter for use with the full range of Protect 800 'V' range Alarms.
Protect 800 additional Wireless Vehicle Detecting Probe & Transmitter: Only Detects moving Steel (avoid False Alarms from Wildlife). Battery Powered Wireless Transmitter (easy and quick Installation). 2400 ft Operation. Covert Probe (can be fully hidden during Installation). Operates with both the Indoor & Outdoor Protect 800 Receivers.
Long Range (2400 ft) Remote Control & SOS Button for the Protect 800 Outdoor Receiver, allows you to Arm & Disarm either channel on the Receiver together with having an SOS option.
12v LED Floodlight for use with the Protect-800 Outdoor Receiver Box.
Protect-800 Outdoor Wireless Receiver supplied with a 12v Security Flood Light which can be added onto any of the Protect-800 Alarms & Alerts.
Protect-800 Outdoor Wireless Receiver supplied with a 85 Decibel 12v Weatherproof Bell which can be added onto any of the Protect-800 Alarms & Alerts.
Protect-800 Outdoor Wireless Receiver supplied with an adjustable 12v Weatherproof Siren which can be added onto any of the Protect-800 Alarms & Alerts.
Protect-800 Outdoor Wireless Receiver supplied with a 12v Blue Flashing Strobe LED which can be added onto any of the Protect-800 Alarms & Alerts.
Protect-800 Outdoor Wireless Receiver supplied with a Loud 6-tone 118 Decibel 12v Weatherproof Siren which can be added onto any of the Protect-800 Alarms & Alerts.
Protect-800 Outdoor Wireless Receiver supplied with a 12v Siren & Flashing Strobe LED which can be added onto any of the Protect-800 Alarms & Alerts.
Photo Cells & Transmitter Kit for the Protect Wireless 800 Alerts & Alarms ideal for applications across Warehouse & Gate Entrances (if power is available on one side). It works in conjunction with all the Protect-800 Receivers.
Additional PIR with Protective Wire Cage & multiple Lens Caps for the Protect 800 Wireless Driveway Alarm. The Cage is designed to help avoid Vandalism & Theft.
Receiver:
Remote Control:
MT Transmitter:
Mounting Box:
Float Switch:
Float Switch Box:
Siren: