Protect 800 Driveway Alarm Additional PIR with Protective Wire Cage & Multiple Lens Caps

Additional Battery Powered Wireless PIR for the Protect 800 Wireless Driveway Alarm System supplied with a unique Protective Wire Cage designed to help avoid Vandalism & Theft.

The PIR is packed full of features including:

• Impressive 2400 ft Wireless Transmission.
• Fully Waterproof.
• Up 45 ft Detection Range (can be further with large objects).
• Adjustable Sensitivity Settings.
• Up to 16 PIR's can be used with any single system.
• Sunshade & Rain Hood.
• Lens size adjusting Caps (ideal to help detect moving vehicles).
• Battery Powered (4 standard AA batteries supplied).
• Low Battery Warning (battery life expected is 9 - 12 months in most applications).
• Battery Status Checking.
• Impressive Vehicle Detection.
• Easy & Quick to Fit.
• Unique choice in operation of:
  • 24 hour operation (for use in locations where all day detection is preferred).
  • Night Time Operation (for use in locations where you only want a working detector during the hours of darkness).

Cage:

A protective Wire Cage is designed to help avoid Vandalism & Theft and would be fixed to the wall using the mounting brackets and fixings supplied.

Please Note:

The Cages are supplied with Security Screws (Torx T30 Tamper Proof), you will need a TX30 Bit (with hole) to use them, these are available from many outlets or can be found in some existing tool kits.

We can also supply them Here.

Lens Caps:

The PIR is supplied with 3 Lens Cap Settings which together with internal adjustments allow you to set the PIR to suit your application, these include:

• Pencil Beam Attachment: Provides a very narrow Beam to avoid small to medium ground animals.
• Medium Beam Attachment: Provides a narrow Beam to avoid most small to medium ground animals whilst detecting Vehicles more efficiently than the Pencil Beam.
• No attachment Fitted: Ideal when the detection of Vehicles is most important to you.

Power Supply:

The PIR is powered by 4 x standard AA Batteries which will last around one year in most applications, the Indoor Receiver will inform you if they are getting low.

Installation Tip:

We recommend the PIR is fitted looking away from a rising Sun rather than towards it, if this is not possible then care should be taken when choosing the location and direction of the PIR, this basic principle is the same for most outdoor PIR's.

Operational Options:

This PIR has the unique feature of being able to use the PIR in two ways:

• 24 hour operation (for use in locations where all day detection is preferred).
• Night Time Operation (for use in locations where you only want a working detector during the hours of darkness).

This allows you to perhaps have some PIR's working throughout the day on a subtle chime from the Receiver, and other PIR's that only work when it is dark, which would trigger a louder Siren on the Receiver (ideal for protecting buildings like workshops etc).

• Protect 800 Wireless Driveway Alert PIR.
• Mounting Bracket.
• 4 x AA Batteries.
• 1 x Removable Sun & Rain Hood.
• 1 x set of Removable Detection Caps.
• 1 x Screwdriver.
• 1 x Set of Screws.
• 1 x Protective Wire Cage (D).

PIR:

• Wireless Operational Range: 2400 ft (line of sight).
• Weatherproof: Yes.
• Detection Range: Up to 45 ft Detection Range (can be further with large objects).
• Angle of Detection: Approximately 9 - 12 degrees @ 12 metres distance.
• Adjustable Sensitivity Settings: Yes.
• Maximum Number of PIR's: 16.
• Sunshade & Rain Hood: Yes.
• Lens size adjusting Caps: Yes (removable).
• Pencil Beam.
• Narrow Beam.
• Wide Beam.
• Battery Powered: Yes (4 standard AA batteries approximately 9 - 12 months).
• Low Battery Warning: Yes (on receiver).
• Battery Status Checking: Yes (on receiver).
• Vehicle Detection: Yes (best with cap removed).
• Size with Bracket (no sun hood): 3 1/2" x 3" x 4".
• Temperature Range: -20℃ to 50℃.
• Choice in operation of:
  • 24 hour operation (for use in locations where all day detection is preferred).
  • Night Time Operation (for use in locations where you only want a working detector during the hours of darkness).

Cage:

• Material: Steel Wire.
• Cage: 3 mm.
• Colour: Black.
• Mounting Method: 2 x Fixed Eyelets.
• External Size: 5 3/8" x 5 3/8" x 5".