Battery 4G UltraDIAL Van Alarm with Wired Vibration Sensor.
4G UltraDIAL battery powered Vibration Sensor Van Alarm:
Recipient :
* Required fields
or Cancel
007-2480-van
New
4G UltraDIAL battery powered Vibration Sensor Van Alarm:
4G Van Vibration Alarm - Operates on 4G, 3G & 2G Networks !! | Please note: out of stock
This product is no longer in stock
Availability date:
4G UltraDIAL battery powered Vibration Sensor Van Alarm:
The UltraDIAL is Armed & Disarmed by the Remote Control supplied (additional ones can be added).
Designed for use in Van & Vehicle applications where there is a need (or desire) to activate an Alarm before a Door access has been achieved.
How it Works:
The UltraDIAL 4G Auto-Dialler is powered by 3 x AA Lithium Batteries and is fully weatherproof (IP66) and can be used in and around many types of Vehicles.
The Wired Vibration Sensor supplied with 3 metres of twin cable (which can be extended upon request) is connected into the UltraDIAL, and would be fitted onto the desired & suitable location by various methods, options are numerous including:
Fixing accessories are not supplied due to the fact that there are many ways to fit the Vibration Sensor.
The Vibration Sensor is very Sensitive and is for Internal Use Only.
If the Vibration Sensor is triggered (whilst the UltraDIAL is Armed), the UltraDIAL will silently contact up to three key-holders by Telephone (with your pre-recorded message) & SMS (either can be turned off if required).
If you want some sound, you can add Internal or External Wireless Sirens located in and around the Vehicle.
Other Uses:
Additional Wireless Alarm Sensors can be added to help protect your Van, Truck or Motorhome, these include:
Contacting Key-holders:
The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.
It will normally take take between 30 - 60 seconds to call the first key-holder when powered by battery as the Alarm sits in sleep mode to preserve battery power (it could be slightly quicker when powered by a usb cable), it can also vary between mobile phone networks at any given time.
Recording Message:
You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.
Arming & Disarming:
The Alarm is Armed & Disarmed by using the Remote Control normally from outside the Vehicle, up to 9 Remote Controls can be used with each Alarm.
If the Alarm is powered by the external 5v USB power source, then it is possible to Arm & Disarm the Alarm via SMS (text message).There is a 30 second Exit Delay built into the Alarm for easy use.
Receiving a Call:
When the Alarm calls the key-holders, there is the choice to:
Easy Programming:
It is very easy to program, probably the easiest 4G or GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.
Weatherproof:
The UltraDIAL is fully weatherproof and rated at IP66, the Vibration Sensor is for Indoor Use only.
Low Battery:
The Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.
SIM Cards:
The Alarm communicates via the mobile phone networks (sim card required), and uses a nano SIM Card (PAYG or Contract). It will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated.
We do offer two Roaming SIM Cards from a third party supplier (at cost) designed for use in Alarms & Tracker Systems, these are low level contract sim cards (working on a direct debit) operating over all the major UK Networks ensuring your Alarm has the best signal available in all locations.
These can be selected within the drop down options near the Add to Card Button.
The two options are our 20 Plan (click here) & 50 Plan (click here), please click the links to read all about them.
You can also purchase the product with no sim card and simply use your preferred supplier (many options are available).
This is a unique Van, Truck & Motorhome Alarm designed and supplied by Ultra Secure Direct.
If you need advice, please Contact Us !!
Unique Battery Powered PIR Alarm with Built in 130 Decibel Siren, operated by Remote Control (up to 150 feet away) and can be used on its own or with various additional Sirens.
Battery Powered Internal Wireless 130 Decibel Siren, for use with the BT Wireless Shed & Garage Alarm Systems.
Unique Solar Powered Wireless Siren & Strobe, with built in 130 Decibel Siren, Tamper Switch & 150 ft Wireless Range, for use with the BT PIR Alarms.
Wireless Door & Window Alarm Contact for use with the full ranges of BT Wireless Alarms.
Best selling 4G UltraPIR Alarm (unique to Ultra Secure): 4G Alarm (contacts owners by Phone & SMS if Triggered). 100% Wireless. AA Battery Powered (long lasting). 130 Decibel Siren (can be silenced). Long Range Remote Control. Stand-alone (stand-alone Alarm or expanded by adding multiple Wireless Alarm Sensors & Sirens). Easy to Install. Can be...
Battery Powered PIR Alarm with Built in 130 Decibel Siren, operated by Remote Control (up to 150 ft away) and can be used on its own or with various additional Sirens. Supplied with a Rubber Hood which is designed to narrow the detection beam and make it less visible.
Wired Output Solar Powered DA600+ Wireless Perimeter Beams with Dual Detection Technology, 300 ft Detection, Wired Cable N/O & N/C Output & 2700 ft Wireless Transmission. Can be connected to a Wired Auto-Dialler.
Wireless Pressure Mat for use with the BT Alarms Systems.
Remote Control which can Arm & Disarm our BT Alarms.
Additional Solar Powered Wireless DA600+ PIR for use with any of the DA600+ Driveway & Perimeter Alarms.
UltraDIAL:
Vibration Sensor:
Remote Control: