4G UltraDIAL Battery GSM Van Door Alarm with a Wireless Vibration Door Sensor

4G UltraDIAL battery powered Wireless Van Door Alarm:

• 1 x Unique Door & Vibration Sensor.
• Keypad on the Door Sensor (can be used to Arm & Disarm the 4G Alarm).
• 130 Decibel Siren (can be used in silent mode).
• 1 x Covert 4G UltraDIAL.
• 1 x Remote Control (more can be added).
• Contacts up the 3 x key-holders by Phone Call & Text.
• Can be Expanded.
• 100% Wireless.
• Battery Powered.
• Ideal Van and other Vehicle Alarm.

How it Works:

This kit comprises of a battery powered 4G GSM UltraDIAL Covert Alarm Dialler & 1 x battery powered Wireless Vibration & Magnetic Contact Sensor.

The 4G UltraDIAL & Wireless Door Sensor are connected to each other within a unique & secure Wireless Network and both are Armed & Disarmed at the same time using the Remote Control (or keypad on the door sensor).

The Vibration & Magnetic Contact Sensor can be used with:

• Vibration mode ON or OFF.
• Magnetic Contact mode ON or OFF.
• Both ON.

When used with Vibration ON, it can be mounted in a position on a Door that will detect a violent attack without detecting normal movement caused by Wind or Traffic (the sensitivity can be adjusted to help with this).

When using the Contact as a Magnetic Contact (which detects doors & being opened) it would be fitted onto a Door with the Magnet being fitted onto the frame (in a position that both parts are nearly touching when the Door is closed).

The device has an optional built in 130 Decibel Siren (which can be turned OFF if a Silent Alarm is preferred). 

If the Vibration or Magnetic Contact is triggered it will Wirelessly trigger the 4G UltraDIAL Van Alarm (which would be hidden safely out of sight) which will silently contact up to three key-holders by Telephone & SMS.

Many additional Sensors & Sirens can can be added to this Alarm (no limit), check the accessory tab on this page.

The secret of using this Alarm is to hide the UltraDIAL in a location where an Intruder wouldn't even know it is there (this is very easy to do in most Vans & Vehicles), this is very easy due to the fact that it is Battery Powered, Wireless & Fully Weatherproof.

This unique Alarm is ideal for so most Vehicle applications and can be expanded upon ordering or at any time in the future.

Communication:

The Alarm communicates via the mobile phone networks (nano sim card required).

It will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated (although either can be turned off if only one method of communication is preferred).

We do offer two Roaming SIM Cards from a third party supplier (at cost) designed for use in Alarms & Tracker Systems, these are low level contract sim cards (working on a direct debit) operating over all the major UK Networks ensuring your Alarm has the best signal available in all locations. 

These can be selected within the drop down options near the Add to Card Button.

The two options are our 20 Plan (click here) & 50 Plan (click here), please click the links to read all about them.

You can also purchase the product with no sim card and simply use your preferred supplier (many options are available).

Additional Sensors:

There are many additional Sensors & Sirens that can be added, these include:

• Wireless Door Contact (007-0260).
• Standard PIR (007-0200).
• Standard PIR with Hood (007-1410).
• Additional Vibration Sensor (007-1460).
• Indoor Battery Siren (007-0230).
• Outdoor Solar or Battery Siren & Strobe (007-0221).

Arming & Disarming:

The UltraDIAL Alarm is Armed & Disarmed by using the Remote Control (supplied) outside of the Vehicle or by the small keypad located on the Door Sensor.

Additional Remote Controls can be added to the Alarm. 

If the UltraDIAL Alarm is powered by the external 5v power source (USB), then it is possible to Arm & Disarm the Alarm via SMS (text message).There is a 30 second Exit Delay built into the Alarm for easy use.

Contacting Key-holders:

The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.

It will normally take take between 30 - 60 seconds to call the first key-holder when powered by battery, and quicker when powered by a usb cable (this can vary depending on the mobile phone networks at the time).  

Recording Message:

You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.

Receiving a Call:

When the Alarm calls the key-holders, there is the choice to:

• Listen to your pre-recorded message and do nothing (the alarm will contact the other key-holders).
• Listen to your pre-recorded message and press # on your telephone (this will disarm the UltraDial and prevent it from calling further key-holders).
• Listen to your pre-recorded message and press * on your telephone (this will prevent it from calling further key-holders, but keep the Alarm fully armed (ready for further activations).

Wireless Vibration & Magnetic Door Contact Sensor:

It has a host of features including:

• Optional Vibration Sensor (with adjustable sensitivity settings).
• Optional Magnetic Contact operation.
• Built in Keypad (can be used to Arm & Disarm).
• Can be Armed & Disarmed by the Remote Controls in the kits.
• Optional built in 130 decibel Siren (can be turned off) operates for 30 seconds.
• Optional Door left Open 'Beep' mode (whilst in disarm mode). 
• Optional Door left Open 'Alarm' mode (whilst in Armed state).
• Easy to Fit Magnet.
• It can also be used as a stand-alone Alarm.

You can choose to use the device with Vibration Only, Magnetic Contact Only or with both Enabled.

When used as a Magnetic Contact on a Door, one part would be fitted onto the Door and the other part onto the Frame (in such a position that when closed both parts are nearly touching).

Keypad:

The device has a small keypad that is used to carry out the choice of commands to suit your application together with being able to Arm & Disarm the complete Alarm system in the event you have forgot to carry the relevant Remote Control.

Wired Alarm Detectors:

The UltraDIAL also has one set of momentary volt free Inputs, 1 x N/O or N/C, these can be used with many types of wired alarm sensors, examples listed below:

• Pressure Mat.
• Vibration Sensor.
• Water & Flood Sensors.
• Tilt Switch.

Easy Programming:

The 4G UltraDIAL Van Alarm is very easy to program, probably the easiest GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.

Weatherproof:

The UltraDIAL is fully weatherproof and rated at IP66, so can be used in most locations, it is not however designed to be submerged.

Low Battery:

The UltraDIAL Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.

Security Screws:

The lid is fitted with 4 x security screws and a tool is supplied as standard.

This is a very versatile 4G Alarm for use in many types of Vans, Trucks, Campervans and more designed and supplied by Ultra Secure Direct.

If you need advice, please Contact Us !!

• 1 x 4G UltraDIAL GSM Alarm.
• 1 x Remote Control.
• 3 x Lithium AA Batteries.
• 1 x Manual.
• 1 x Tool.
• 1 x Wireless Vibration & Magnetic Contact.
• 1 x Magnet.
• 1 x Set of Double Sided Tape.
• 2 x Screws.
• 1 x CR2 Lithium Battery.

UltraDIAL:

• Battery Power: 3 x Lithium AA Batteries (supplied).
• Battery Life: 6 months in most applications).
• Main Power: Yes (optional 5v DC plug in transformer).
• Programming Method: Easy Built in Keypad.
• Operates on 4G, 3G & 2G Networks.
• Wireless Transmission Range: 300 ft.
• Size: 6 1/4" x 3 1/4" x 1 3/4".
• Colour: Black.
• Wired Inputs: Yes (1 x Volt Free N/O or N/C).
• Cable Entry: 2 x Glands.
• Wireless Inputs: Yes (Wireless PIR's & Door Contacts).
• Wireless Outputs: Yes (Internal & External Sirens, PIR's).
• SIM Card Required: Yes (nano size).
• Calls Key-holders: Yes (maximum of three, which can be turned off).
• Sends Key-holders SMS: Yes (maximum of three, which can be turned off).
• Built in Siren: No (designed as a covert alarm).
• Mounting Method: 2 x Screw Holes in Flange.
• Weatherproof: Yes (IP66).
• Arming & Disarming Method: Remote Control, Keypad, Receiving A Call.
• Remote Operation on Battery: Yes (# to Disarm, * to Stop & Remain Armed).
• Remote Operation on Mains:  Yes (# to Disarm, * to Stop & Remain Armed, SMS to Arm, SMS to Disarm).
• Power Failure Notification: Yes (when used with a plug in transformer).
• Weekly Status Report: Yes (can be turned off).
• Low Battery Notification: Yes (to primary key-holder).
• Recording Message: Yes (this will be replayed to the key-holders when the alarm calls them).
• Frequencies:
• LTE-TDD B38/B40/B41.
• LTE FDD B1/B3/B5/B7/B8/B20/B28.
• UMTS/HSPA+ B1/B8.
• GSM/GPRS/EDGE 900/1800 MHz.

Sensor:

• Wireless Operation with UltraDIAL Alarms: Yes.
• Wireless Operation with BT PIR Alarms: Yes.
• Wireless Range: 300 ft (line of sight).
• Internal Siren: Yes 130 Decibel (optional, can be turned ON or OFF).
• Vibration Sensor: Yes (optional). 
• Magnetic Contact: Yes (optional).
• Vibration Sensitivity Adjustment: Yes (low, medium & high).
• Duration of Siren: 30 seconds. 
• Keypad Code Change: Yes (cannot start with 3).
• Keypad To Arm: Yes (press 3). 
• Keypad To Disarm: Yes (code + 3).
• Exit Delay: 20 seconds.
• Entry Delay: 5 seconds.
• Change Code Option: Yes.
• Size of Contact: 21/4" x 1 1/2" x 5/8".
• Size of Magnet: 1 3/4" x 1/2" x 1/2".
• Power Supply: Battery (1 x 3v Lithium CR2 Battery).  
• Colour: White.
• Open Door Beep: Yes Optional (when disarmed).
• Open Door Siren: Yes Optional (when armed).
• Test Mode: Yes (beep on open & close with 30 second reset.
• Stand-alone Operation: Yes.
• Frequency to Wireless Sirens 868 Mhz.