HY Solar Wireless Siren House Alarm Kit 2

The very simple to Fit HY Solar Wireless House Alarm Kit 2 using a Solar Wireless Siren which doubles up as a Control Panel and is Armed & Disarmed using the Remote Controls supplied, no need for any Electric Power Supply.

This Kit (which can be used with Homes & Business premises) includes:

• 1 x Solar Siren & Control Panel.
• 2 x Remote Controls.
• 3 x Wireless Magnetic Door & Window Contacts.
• 1 x Wireless Smoke & Heat Sensor.

How to Install:

1. Pair the Contacts & Remote Controls into the Siren (we will do this for you when it is purchased as a kit).
2. Pair the Smoke & Heat Sensor into the Siren using a 24 Hour setting (we will do this for you when it is purchased as a kit).
3. Mount the Siren on the House wall (ideally on a South or East facing wall to help with the Solar charging of the Siren).
4. Mount the 3 x Magnetic Contacts on Doors/Windows & Frames (using double sided tape and small screws supplied) in a position that results in both parts nearly touching when the Door or Window are closed. 
5. Mount the Wireless Smoke & Heat Sensor.

How it Works:

The Solar Siren & Control Panel is powered by a built in lithium battery which is charged and maintained by the top mounted Solar Panel, it also has a built in tamper switch should someone try to remove it. This Siren doubles up as the Alarm Control Panel and is Armed & Disarmed using the 2 x Remote Controls supplied (a further 6 could be added). 

The Siren would be fitted to the outside wall of your home (ideally on a South or East facing wall) using screws and wall plugs, no power supply is required.

The Magnetic Contacts (additional can be added) are connected to the Siren using a unique Wireless code, when the Door or Window is opened a signal will be sent to the Siren, if the Siren is Armed it will trigger the loud multi tone 105 Decibel Siren & Flashing Strobe for a duration of 3 minutes.

If the Smoke & Heat Sensor is triggered (regardless of if the Siren is Armed), the Siren will be activated for 3 minutes.

The Siren can be turned off at any time using the Remote Controls, should you not be at home after 3 minutes it would stop but remain Armed.

There is no time delay, so you would turn the Alarm ON & OFF using the Remote Control (from inside or outside) before opening the Door (or walking past a PIR if one is added to the system).

There is a wide range of accessories that can be added to this Alarm System, you can use up to 12 standard Alarm detectors (magnetic contacts, pir's etc) and 4 detectors that are always turned ON (smoke & panic buttons etc), these include:

• Magnetic Contacts.
• Standard PIR's.
• Pet Friendly PIR's (will not detect combined animals under 10 kilo).
• Remote Controls.
• Smoke & Heat Detectors.
• Smoke Detectors.
• Panic Buttons.
• Vibration Sensors.
• Outdoor PIR's.
• Curtain PIR's.
• Roller Shutter Door Contacts.

There are many other accessories available, please contact us for advice.

The Wireless Range between the Siren and accessories is 100 metres (line of sight) which equates to around 40 - 60 metres in most applications (this can be doubled by adding a signal repeater).

SOS:

The Remote Control also has a SOS Button on it, allowing homeowners to trigger the Siren at any time from inside or outside the property.

 An ideal Alarm for customers not wanting to get a power supply to the Alarm, can be used on Homes, Business Premises, Workshops, Barns, Garages etc !!

• 1 x HY Solar Wireless Siren.
• 2 x Remote Controls.
• 3 x Magnetic Door & Window Contacts.
• 1 x Wireless Smoke & Heat Sensor.

Control Panel:

• Wireless: Yes.
• Wireless Range: 300 - 900 ft (line of sight).
• Power Supply: Built in Battery (2600 mAh 3.7v Lithium).
• Standby Time: 60 days (with no charging).
• Charging Method: Built in Solar Panel.
• Channels: 16.
• Channel Type:
• 12 x Normal (require remote control).
• 4 x 24 Hour (will operate the siren even in disarmed mode).
• Colour: White.
• Siren: 105 Decibel.
• Flashing LED's: Yes (when activated).
• Tamper Switch: Yes (lid and base).
• Remote Control Operation: Yes (up to 8 per Siren).
• Siren Duration: 30 seconds or 3 minutes.
• Size: 12" x 8.5" x 4".
• Fitting Method: Remove Lid, fix base to the wall using 3 x screws.
• Frequency: 433 MHz.
• Optional Output Relay: Yes N/O & N/C (operates for the duration of the Siren).

Remote Control:

• Wireless Operating Range: 450 ft (line of sight).
• Control:
• Arm.
• Disarm.
• Panic Button.
• Safety Lid: Yes (sliding).
• Colour: Black.
• 2.5" x 1.5" .5".
• Extending Aerial: Yes ( 0 to 2.4").
• Key Ring Bracket: Yes.
• Battery: 1 x MN21 12v.
• Frequency: 433 MHz.

Magnetic Contacts:

• Switch Size: 2.8" x 1.4" x .5".
• Magnet Size: 2.5" x .5" x .5".
• Extendable Aerial: 1.5" - 5.5".
• Power Supply: 1 x 12v MN21 Battery.
• Battery Life: 6 - 12 months (normal use).
• Wireless Range: 900 ft (line of sight).

Installation Method:

1. Switch: Double sided tape (included).
2. Magnet: Double sided tape & self 2 screws.

Smoke & Heat Sensor:

• Power Supply: 1 x PP3 Battery (supplied).
• Battery Expected Life: 12 months in most applications (recommend testing once per week).
• Transmission Distance: 300 ft (line of sight).
• Alarm Buzzer: Yes (85 Decibels).
• Frequency: 433 MHz.
• Detecting Area: 
• 80 m2 when fitted between 18 to 36 ft high.
• 60 m2 when fitted at 18 ft high.
• Size: 5" x 1.5".
• Standards: GB4715, GB4716, EN14604, UL217.
• Humidity: 95% RH.
• Operating Temperature: 14 to 122 Fahrenheit.
• Alarm Temperature: + 54 - 65 Degrees.
• Alarm Current: 35 m/A.
• Standby Current: 10 uA.
• Colour: White.