PIR for the KP Wireless Alarms.

Battery Powered Wireless PIR's, designed to work in conjunction with our full range of KP Wireless Alarm Systems.

It has a 36 ft detection range & 110 degree detection pattern, a wireless range back to the receivers of 300 ft (line of sight) and is powered by a single PP3 battery (which would last approximately one year).

PIR Advice:

It is important to fit the PIR into the best possible location to achieve the best results, a sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance.

Please see the following advice:

1. Mount the PIR into a corner of a room.
2. Avoid heat spots from bright lamps suddenly turning on or off.
3. Do not install immediately above a radiator.
4. Do not install in a glass roof conservatory.
5. If possible, choose a corner of the room which is visible from an outside window, the PIR also creates a visual deterrent.

• 1 x Wireless PIR.
• 1 x Mounting Bracket.
• 1 x PP3 Battery.
• 1 x Manual.

• Size: 4" x 2.4" x 1.4" (without bracket).
• Depth: 1.4" (without bracket) 2.4" (with bracket).
• Detection Range: 36 ft.
• Detection Angle: 110 Degrees.
• Power Supply: 1 x PP3 Battery (supplied).
• Battery Life: Approximately 1 year (normal use).