Remote Location Covert Battery 4G UltraDIAL Gate & Door Alarm

Remote location battery powered 4G GSM Stand-alone Covert UltraDIAL Gate or Door Alarm will contact up to 3 x key-holders via Telephone & SMS if triggered, supplied with:

• 1 x Wired External Magnetic Gate Contact
• 1 x Remote Control (more can be added).

How it Works:

The UltraDIAL 4G Auto-Dialler is powered by 3 x AA Lithium Batteries (plug in power supply can be added if there is sometimes power available) and is fully Weatherproof (IP66) and is ideal for use in the most remote locations (provided there is a mobile phone signal at the location). 

The Wired Gate or Door contact comes supplied with 1 ft of armoured cable (it could be extended but we would recommend protecting the cable while doing so) and is connected into the input relays on the UltraDIAL.

The Magnetic Contact Switch would normally be fitted onto a Gate or Door Post (in the most suitable location) whilst the Magnet would be fitted onto the Gate or Door (in such a position that they are nearly touching when closed).

If someone opens the Gate whilst the UltraDIAL is Armed, the UltraDIAL will silently contact up to three key-holders by Telephone (with your pre-recorded message) & SMS (either can be turned off if required).

The UltraDIAL is Armed using a Remote Control supplied. 

Uses:

This simple Alarm is ideal for various applications, these include:

• Remote Gates.
• Stable Doors.
• Fuel Tank Hinged Door.
• Remote Barn & Workshop Doors.
• The list is endless !!

Communication:

The Alarm communicates via the mobile phone networks (nano sim card required). It will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated.

Other Uses:

This UltraDIAL can also be used as an Intruder Alarm using various Wireless Detectors & Sirens which can help share the investment, the options include:

• Wireless Door Contacts (007-0260).
• Indoor Battery Siren (007-0230).
• Outdoor Solar or Battery Siren & Strobe (007-0221).
• Standard PIR (007-0200).
• Standard PIR with Hood (007-1410).
• Wireless Vibration Sensor (007-1460). 

Contacting Key-holders:

The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.

It will normally take take between 30 - 60 seconds to call the first key-holder when powered by battery, and quicker when powered by a plug in transformer or usb cable (this can vary depending on the mobile phone networks at the time).  

Recording Message:

You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.

Power Supply:

The Alarm is powered by 3 x Lithium AA Batteries (supplied) which will last around 6 months in most applications, it can also be powered by a 5v Plug in Transformer or USB Cable where a power supply is available. If the power supply is used, the batteries can be kept in the Alarm as a backup although they will not be charged by the device.

Arming & Disarming:

The Alarm is Armed & Disarmed by using the Remote Control from up to 300 ft away, up to 9 Remote Controls can be used with each Alarm. It is also possible to Arm & Disarm the Alarm using the built in keypad if the remote control is not available.
If the Alarm is powered by the external 5v power source, then it is possible to Arm & Disarm the Alarm via SMS (text message).There is a 30 second Exit Delay built into the Alarm for easy use.

Receiving a Call:

When the Alarm calls the key-holders, there is the choice to:

• Listen to your pre-recorded message and do nothing (the alarm will contact the other key-holders).
• Listen to your pre-recorded message and press # on your telephone (this will disarm the UltraDial and prevent it from calling further key-holders).
• Listen to your pre-recorded message and press * on your telephone (this will prevent it from calling further key-holders, but keep the Alarm fully armed (ready for further activations).

Wireless Sirens:

The Alarm can be paired to various devices which have built in Sirens, these will make the sound whilst the Covert UltraDIAL silently calls the key-holders without an Intruder knowing:

These Sirens & devices include:

• Indoor Battery Siren (007-0230).
• Outdoor Solar or Battery Siren & Strobe (007-0221).
• Standard PIR (007-0200).
• Standard PIR with Hood (007-1410).
• Wireless Vibration Sensor (007-1460).

Easy Programming:

It is very easy to program, probably the easiest GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.

Weatherproof:

The UltraDIAL is fully weatherproof and rated at IP66 (not to be submerged), so can be used in most locations.

Low Battery:

The Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.

Status Report:

A status report can be obtained by sending the device a Text Message.

Mains Power Failure:

When the Alarm is being powered by an external 5v power supply, it will send the primary key-holder a SMS (text message) in the event of a Power Cut together with another when the power comes back on (provided you also have batteries fitted).  

Security Screws:

The lid is fitted with 4 x security screws and a tool is supplied as standard.

SIM Cards:

This Alarm uses a nano sim card, we recommend using a SIM Card with a Network from the Country that the device will be used.

This is a very versatile Security device ideal for locations with limited access to Power, designed by Ultra Secure Direct.

If you need advice, please Contact Us !!

• 1 x 4G UltraDIAL Alarm.
• 1 x Remote Control.
• 3 x Lithium AA Batteries.
• 1 x Wired Magnetic Contact & 300 mm of Armoured Cable.
• 1 x Magnet.
• 1 x Manual.
• 1 x Tool.

UltraDIAL:

• Battery Power: 3 x Lithium AA Batteries (supplied).
• Battery Life: 6 months in most applications).
• Main Power: Yes (optional 5v DC plug in transformer).
• Programming Method: Easy Built in Keypad.
• Operates on 4G, 3G & 2G Networks.
• Wireless Transmission Range: 300 ft.
• Size: 6 1/4" x 3 1/4" x 1 3/4".
• Colour: Black.
• Wired Inputs: Yes (1 x Volt Free N/O or N/C).
• Cable Entry: 2 x Glands.
• Wireless Inputs: Yes (Wireless PIR's & Door Contacts).
• Wireless Outputs: Yes (Internal & External Sirens, PIR's).
• SIM Card Required: Yes (nano size).
• Calls Key-holders: Yes (maximum of three, which can be turned off).
• Sends Key-holders SMS: Yes (maximum of three, which can be turned off).
• Built in Siren: No (designed as a covert alarm).
• Mounting Method: 2 x Screw Holes in Flange.
• Weatherproof: Yes (IP66).
• Arming & Disarming Method: Remote Control, Keypad, Receiving A Call.
• Remote Operation on Battery: Yes (# to Disarm, * to Stop & Remain Armed).
• Remote Operation on Mains:  Yes (# to Disarm, * to Stop & Remain Armed, SMS to Arm, SMS to Disarm).
• Power Failure Notification: Yes (when used with a plug in transformer).
• Weekly Status Report: Yes (can be turned off).
• Low Battery Notification: Yes (to primary key-holder).
• Recording Message: Yes (this will be replayed to the key-holders when the alarm calls them).
• Frequencies:
• LTE-TDD B38/B40/B41.
• LTE FDD B1/B3/B5/B7/B8/B20/B28.
• UMTS/HSPA+ B1/B8.
• GSM/GPRS/EDGE 900/1800 MHz.

Gate Contact:

• Size of Magnetic Switch: 4" x 1 1/2" x 3/8".
• Size of Magnet: 4" x 5/8" x 5/8".
• Length of Cable: 1 ft.
• Cable Protection: Armoured Sleeve.
• Switch Type: N/C.
• Weatherproof: Yes.
• Fixing Method: 2 x  3/8" Screw Mounting Holes in Each Section.