Wired Output 1B-100 DA600+ Solar Perimeter Beams

1B Solar Powered DA600+ Wireless Perimeter Beams together with a Wired N/O & N/C Cable Output designed to be connected to various devices including a Battery Powered GSM Dialler.

Wired Output:

The 'R' Beam is supplied with a N/O or N/C Output Cable which can be connected to suitable devices such as a Battery GSM Auto-Dialler, this allows a Security System that can literally be installed in the middle of nowhere. The second Beam has no cable connection.

Wireless Transmission:

The Beams still have the built in Wireless Transmitter which has an impressive range of 2700 ft (line of sight) back to any DA600+ Receiver, ideal for customers wanting to possibly move the Beams between different locations and applications.

Detection:

The Dual Detection Technology works by having a pair of Detectors (set 2 1/4" apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by. 

The Beams are supplied as a pair together with mounting brackets, they need to be installed in such a way that they are facing each other up to a maximum of 300 ft apart.

They are easy to line up using the built in screen together with the option of having a low audible beep a few seconds after being breached (which some customers like to keep turned on), while some customers use this feature during the initial set up mode.

Power Supply:

The Beams are powered by built in lithium batteries which are charged and maintained by the built in Solar Panels, the Solar Panels require daylight to function, suitable for most outdoor applications.

There is an optional rear mounted charging point for customers who may have to fit one or both beams in the shade, these could then have a maintenance charge a few times a year using a plug in transformer or battery pack.

Please Contact Us for Advice !!

Please Note: Work in conjunction with all DA600+ products !!

• 1 x Set of 1B-100 Solar Beams.
• 1 x Wired N/O Output Cable.
• 1 x Set of Wall Mounting Brackets. 
• 1 x Set of Pole Mounting Brackets.
• 1 x Set of Instructions. 

• Beam Size: 13.4" x 5" x 1.8".
• Power Supply: Re-chargeable Lithium Batteries.
• Charging Method: Built in Solar Panels.
• Mounting Methods: Wall or Pole.
• Detection Range: 300 ft.
• Transmission Range: 2700 ft (line of sight).
• Frequency: 433 Mhz.
• IP Rating: IP66.
• Distance Between Detection Beams: 2.2".
• Number of Beams: 1 set.
• Charging Port: 9 - 12v DC (500 m/A to 1 amp).
• Cable Output: N/O or N/C.
• Cable Length: 30" (2-core).