Disabled Toilet Pull Cord Switch Wireless KP Help Alarm

Disabled Toilet Pull Cord Switch Wireless KP Alarm designed for easy & quick installation, the Pull Cord has a built in Battery powered Wireless Transmitter allowing it to be fitted into the most practical location, the small Siren assembly is powered by a 3-pin Transformer.

How it Works:

When the Wireless Pull Cord Switch is pressed, the 40 Decibel Buzzer & Flashing Strobe LED will activate and remain ON until such time that the system is reset using the Reset Button (located at the bottom of the control box).

Addition Buzzer & Flashing Strobe Assemblies can be added (no limit) together with additional Panic Buttons (maximum of 20).

Operational Range:

The Wireless range between the Pull Cord Switch and Siren assembly is 100 metres (line of sight), which equates to around 40 - 50 metres in most applications.

This can be extended by adding one or more signal repeaters to help push the wireless signal through walls and obstructions (if required), our reference 005-0760

Reset Button:

The Siren assembly has the Reset Button located on the bottom of the Control Box, which is fine for most applications, it is possible for us to supply a system with a wireless reset if preferred. 

Buzzer:

This model is supplied with a 40 Decibel Buzzer, which is fine for most applications because it latches ON together with having a Flashing LED, we can however fit Louder or adjustable Sirens upon request.

Installation:

Installation is very simple:

1. Fit the Siren assembly to the wall using 4 side mounted screw holes (it is weatherproof should you want to mount it outside).
2. Power the Siren assembly up by plugging in a standard 3-pin Transformer (we recommend the socket is placed out of reach or sight).
3. Fit the Pull Switch assembly FIRMLY onto the Ceiling.
4. Test by pulling the Pull Switch.
5. Reset by using the Reset Button.

You can add up to 19 additional Panic Buttons to this Alarm System, there are also different styles available which may suit your business, please see below:

• Standard Remote Control, reference 005-0630 (from up to 60 metres away).
• Panic Button, reference 005-0700 (from up to 100 metres away).
• Long Range, reference 005-1460 (from up to 1000 metres away).
• Wristwatch, reference 005-1480 (from up to 50 metres away).
• Necklace, reference 005-0680 (from up to 50 metres away).

You can add a battery backup Plug in UPS, our reference 010-0660 should you want to cover the possibility of a Power cut.

This is a very Easy to Use & Fit Wireless Disabled Toilet Alarm.

Please Contact US should you have any questions

• 1 x Wireless Receiver with 40 Decibel Buzzer (009-2840).
• 1 x Wireless KP Pull Switch Assembly (009-4120). 

Siren & Strobe Assembly:

• Power Supply: Plug in Transformer.
• Blue Flashing LED: Yes (when activated by either Panic Button).
• Buzzer: 40 Decibel.
• Duration of LED & Buzzer when Activated: Constant (Latched ON).
• Reset Method: Reset Button.
• Size: 8" x 3.75" x 3.8".
• Wireless Range: 300 ft (line of sight).
• Number of Wireless Transmitters can be used: Maximum 20.
• Weatherproof: Yes.

Pull Switch:

• Size of Assembly Base: 3 1/2" (L) x 3 1/2" (W) x 4" (D). 
• Switch: Momentary.
• Cord Length: 6 ft (can be shortened).

Transmitter:

• Size: 1.5" x 2.8" x .7".
• Power: 12v Battery (MN21)
• Wireless Transmission Range: 300 ft (line of sight).