Long Range (3000 ft) Wireless Warehouse 'S' Bell System with Internal Push Button

A very simple to fit Long Range (3000 ft) Warehouse Wireless 'S' Bell System, supplied with an Internal Wireless Battery Powered Push Button, Wireless Receiver & Loud 85 Decibel Bell.

The Wireless Push Button is supplied with a wall bracket and is ideal for fitting inside a Reception area, it can also be taken out of the wall bracket and used as a portable Call Button (if required).

Popular in many applications including:

• Warehouses.
• Schools.
• Factories.
• Farms & Rural Businesses.
• Large Homes.
• External Home Offices.
• Workshops.

The transmission range between the Battery powered Wireless Push Button and plug in Receiver is an impressive 3000 ft (line of sight), which equates to around 1000 - 1500 ft in most applications, this can be at least doubled by adding the Signal Repeaters (004-2910).

How it Works:

The Push Button would normally be slipped into the wall bracket supplied, and is ideal for fitting inside an unmanned Reception area and is very easy and quick to fit.

The Receiver is powered by a plug in Transformer and has a built in chime (with adjustable volume), this is connected to a 85 Decibel Bell by 10 ft of cable (this can be lengthened or shortened upon request), the Bell is fully weatherproof therefore can be fitted inside a Warehouse or in the Yard. 

Typical installations would have the Receiver inside a Warehouse Office and the Bell fitted in the Warehouse.

When the Push Button is pressed, the Receiver will activate the built in Chime/Buzzer and the Wired Bell, the standard duration options for the Bell activations are from 10 - 60 seconds or 5 minutes.

When the system is not required, you simple turn the Internal Receiver OFF or remove the Push Button from the wall bracket.

Installation Guide:

These Bell Systems are very Easy to Install, the basic process would be:

1. Mount the Push Button Wall Bracket.
2. Mount the Plug in Receiver & Connect the 3-pin Plug into a Wall Socket.
3. Mount the Bell.
4. You may need to Remove the Cable between the Receiver & Bell to guide it through a hole in a Wall or Post.
5. The Cable can be lengthened or shortened during the Installation using simple 2-core Bell Cable.

Additional Accessories:

Many different accessories can be added to this Warehouse Bell System to suit most commercial applications, these include:

• Additional Push Buttons & Transmitters.
• Simple Handheld or Wall Mounted Internal Push Buttons.
• Additional Receivers.
• Additional Bells.
• Loud Wired Sirens.
• Wired Buzzers.
• Wired Adjustable Sirens.
• Flashing LED's.
• Signal Repeaters.

These Wireless Bell System could also be used for other uses including:

• Staff Call Systems.
• Staff Panic Alarms.
• Intruder Alerts.

Please Contact Us for Friendly, No Obligation Advice !!

Very Easy & Quick to Install !!

• 1 x Long Range Battery Push Button.
• 1 x Plug in Receiver.
• 1 x Plug in Transformers.
• 1 x 85 Decibel Bell.
• 1 x 10 ft of Bell Cable. 

Wireless Receiver:

• Receiver Size: 6.2" (W) x 4" (H) x 1.5" (D).
• Power Supply: 15v DC 1amp (plug in transformer).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Available Channels: 4.
• Max sets of Beams per Channel: 32.
• Maximum sets of Detectors per Receiver: 128.
• Output Voltage: 12v DC.
• Output Voltage Duration: 1, 10, 60 second & 5 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Wireless Working Range: 3000 ft (line of sight).

Wireless Push Button:

• Wireless Range: 3000 ft (line of sight).
• Power Supply: 1 x MN21 12v Battery.
• Push Buttons: One.
• Frequency: 433 Mhz.
• Size: 3.5" x 1.75" x 1.75 ft.
• Colour: White, Grey & Red Button.
• Optional Cable Connection: Yes.

Bell Specification:

• Power Supply: 12v DC.
• External: Yes.
• Size: 6" Diameter x 2.4" Deep.
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Decibel.