Extra Long Range (6000 ft) Wireless 'S' Bell Alert System

Extra Long Range (6000 ft) Wireless 'S' Bell Alert System supplied with a Heavy Duty Push Button (with please ring etched onto it), a Receiver with a Built in Chime or Buzzer (with adjustable volume) and a Wireless Signal Repeater.

The system includes a Plug in Signal Repeater which extends the signal from 3000 ft to 6000 ft (line of sight), which can be extremely useful in Warehouses & Commercial buildings full of stock, walls & general obstructions.

Popular in many commercial applications including:

• Warehouses.
• Schools.
• Factories.
• Farms & Rural Businesses.
• Large Homes.
• External Home Offices.
• Workshops.

The transmission range between the Battery powered Wireless Transmitter and the plug in Wireless Bell is an impressive 3000 ft (line of sight) using the Signal Repeater, which equates to around 2000 - 3000 ft in most applications, this can still be increased by adding further Signal Repeaters (004-2910).

How it Works:

The Heavy Duty Push Button (with 'Please Ring' etched onto it) is connected to a Long Range Battery Transmitter (fitted inside a easy to mount weatherproof box) by 10 ft of bell cable (which can be shortened or lengthen upon request).

The Push Button would be mounted onto the most appropriate location and the transmitter box would be located into the lost suitable location for wireless transmission (this could be simply on the back of a post or just inside a factory wall).

The Receiver is powered by a plug in Transformer and has a built in chime or buzzer (with adjustable volume from zero to 85 decibel) and simple ON/OFF Button. The Receiver also has an optional 12v output and dry relay outputs which can be used to operate Sirens, Buzzers & Flashing LED's.

When the Push Button is pressed, a Wireless Signal will be transmitted to the Signal Repeater (which can be within 3000 ft, line of site) which will then relay the signal a further 3000 ft (line of site) to the Receiver.

When the system is required, you simple turn the Internal Receiver OFF.

Installation Guide:

These Bell Systems are very Easy to Install, the basic process would be:

1. Mount the H/D Push Button.
2. Mount the Battery Transmitter & Box (4 x Screws).
3. You may need to Remove the Cable between the Push Button & Transmitter Box to guide it through a hole in a Wall or Post (the cable can be lengthened or shortened to suit the application).
4. Mount the Signal Repeater (approximately halfway between the transmitter and receiver) and connect the Power Supply into a suitable wall socket.
5. Mount the Plug in Receiver & Connect the Plug into a Wall Socket.

Additional Accessories:

Many different accessories can be added to this Wireless Alert System to suit most commercial applications, these include:

• Additional Push Buttons & Transmitters.
• Simple Handheld or Wall Mounted Internal Push Buttons.
• Additional Receivers.
• Additional Bells.
• Loud Wired Sirens.
• Wired Buzzers.
• Wired Adjustable Sirens.
• Flashing LED's.
• Signal Repeaters.

These Wireless Bell System could also be used for other uses including:

• Staff Call Systems.
• Staff Panic Alarms.
• Intruder Alerts.

Please Contact Us for Friendly, No Obligation Advice !!

Very Easy & Quick to Install !!

• 1 x H/D Push Button.
• 1 x S Transmitter & Mounting Box.
• 1 x Plug in Receiver.
• 1 x Wireless Signal Repeater.
• 2 x Plug in Transformers.
• 1 x 10 ft of Bell Cable. 

Wireless Receiver:

• Receiver Size: 6.2" (W) x 4" (H) x 1.5" (D).
• Power Supply: 15v DC 1amp (plug in transformer).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Available Channels: 4.
• Max sets of Beams per Channel: 32.
• Maximum sets of Detectors per Receiver: 128.
• Output Voltage: 12v DC.
• Output Voltage Duration: 1, 10, 60 second & 5 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Wireless Working Range: 3000 ft (line of sight).

Wireless Transmitter:

• Wireless Range: 3000 ft (line of sight).
• Power Supply: 1 x MN21 12v Battery.
• Push Buttons: One.
• Frequency: 433 Mhz.
• Size: 3.5" x 1.5" x .75".
• Colour: White, Grey & Red Button.
• Optional Cable Connection: Yes.

Transmitter Mounting Box:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 7.8" (L) x 3.5" (W) x 1.75" (D).

Push Button Specification:

• Size: 3.5" (L) x 1.75" (W) x 1.75" (D).
• Contact Type: NO or NC.
• Sealed Wired Contacts.
• Words: Please Ring.

Signal Repeater:

• Wireless Range: 3000 ft (line of sight).
• Power Supply: Plug in Transformer.
• Frequency: 433 Mhz.
• Size:6.2" x 6.2" x 2.2".