Wireless Photo Cell Protect 800 Alert Kit with Indoor Chime Receiver

Wireless Photo Cell Protect 800 Alert Kit supplied with an Indoor Chime Receiver ideal for applications across Warehouse & Gate Entrances (if power is available on one side).

It works in conjunction with all the Protect-800 Receivers & Transmitters. 

The kit is supplied with the following:

• 1 x Protect-800 Wireless Transmitter (mounted inside a weatherproof box).
• 1 x set of Weatherproof Photo Cells.
• 1 x Indoor Receiver.
• 2 x 2 -pin U.S Plug in Transformers.

The Wireless Transmitter has a working range back to the Receiver of 2400 ft (line of sight), which equates to around 1000 - 1500 ft in most applications.

How it Works !!

The weatherproof Photo Cells are supplied as a pair which need to be mounted either side of a suitable Entrance in a position where they are looking at each other (maximum distance 36 ft), one Photo Cell is powered by the Plug in Transformer (supplied), whilst the second Photo Cell is powered by a Battery (supplied) for easier Installation.

Connected to the powered Photo Cell (by 9 ft of cable) is a Battery powered Transmitter (mounted inside a weatherproof box), which will send a Wireless signal to the Indoor Receiver when the Photo Cell Beams are triggered.

Additional Indoor & Outdoor Receivers can also be added (no limit).

A unique Wireless Driveway & Entrance Alert !!

Please Contact Us for any Advice !!

• 1 x Set of Photo Cells & Battery.
• 1 x Protect-800 Transmitter & Battery (inside a weatherproof box).
• 1 x Indoor Receiver.
• 2 x 2-pin Plug in Transformers.

Receiver:

• Wireless Operating Range: 2400 ft (line of sight).
• Adjustable Volume: Yes (from low to approximately 85 decibel).
• Melody Options: 32.
• Power Supply: 2-pin U.S  Transformer Supplied.
• Battery Backup: Yes 4 x AAA Batteries (not supplied).
• Loss of Mains Power Notification: Yes (LED).
• Low Battery Notification: Yes.
• Maximum Number of Detectors Can Be Used: 16.
• Multiple Receivers can be used: Yes (no limit).
• Zone Indicator: Yes (visual and by chime).
• Dry Relay Outputs: 4 (N/O & N/C Momentary).
• 12v DC Output with adjustable Duration (5, 30 & 60 seconds or 10 minutes).
• Relay Duration: Momentary.
• Mounting Method: Wall or Desk Mounted.
• PIR Battery Check: Yes.
• Optional Pause Modes: Yes.
• Input Voltage: 12v DC 500 mA.

Photo Cells:

• Working Voltage: 12~24VAC/DC or 3V Dry Battery.
• Working Current(24VDC):emitter: =8mA receiver: =40mA.
• Photocell Wavelength: 940nm.
• Angle of opposite emission: =±5º.
• Receiver range: = 36 ft.
• Internal Rotation system adjusted Angle: 0~180 º.
• Working temperature: -20º~+60?.
• Relay contact loading capacity: 1A/30VDC.
• Waterproof grade: IP54.
• Size: 5" x 2" x 1".

Wireless Transmitter:

Transmitter:

• Wireless Range: 2400 ft (line of sight).
• Power Supply: 1 x 3v Lithium CR123A Battery.
• Battery Life: 12 - 18 months (most applications).
• Size: 2 1/2" x 1 3/8" x 3/4".
• Activation Methods:
• Wired Input: Yes (N/O or N/C Momentary Volt Free, when used as a circuit board).

Mounting Box:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 6" x 3 3/8" x 1 3/8".
• Label: V range.

Photo Cell Transformer:

• Voltage: 12v DC.
• Output: 1 amp.
• Cable Length: 9 ft.
• Pin Type: 2-pin US.