Long Range (2700 ft) Wireless 'S Range' DA600+ Panic Alarm (activity centre special)

Long Range (2700 ft) 'S Range' DA600+ Wireless Panic Alarm ideal for applications such as Swimming Pools, Gyms and other workplaces, popular with trades as they can add there value with professional & clean installation, the kit includes:

• Large IP Rated Push Button (IP66).
• Battery Powered Wireless Transmitter inside an IP rated Mounting Box.
• Plug in Wireless Receiver.
• 100 db Wired Siren & Flashing Strobe (can be replaced by Buzzers, Bells, Wireless Sirens, Louder Wired Sirens)

Compatible with all DA600+ products !!

Please Note: 

There is no limit to how many additional Push Buttons, Wireless Transmitters, Receivers & Sirens that can be added to this system to suit many types of installations.

Transmission Range:

The transmission range from the Wireless Transmitter & Wireless Receiver is an impressive 2700 ft (line of sight) which equates to around 1000 - 1800 ft in most applications, this can be at least doubled by adding the Signal Repeaters (004-2910).

Push Button:

The large Red Push Button would be fitted onto the most suitable location and connected to the battery powered Wireless Transmitter (fitted into an easy to mount ip rated box) by 3 metres of bell cable (which can be lengthened or shortened upon request).

Wireless Receiver:

The Wireless Receiver plugs into a wall socket using a standard 2-pin transformer and can be located up to 2700 ft (line of sight) away from the Wireless Transmitter, this Receiver has a built in Chime which is adjustable from OFF to 85 Decibel (ideal for an office).

The Receiver has no battery back up, therefore some installers will choose to add a UPS, part number 010-0660 which will operate the Receiver during a Power Cut.

Siren:

The 100 decibel Siren & Flashing Strobe is connected to the Receiver by 9 ft of Bell Cable (which can be lengthened upon request) and is suitable for installing both Inside or Outside of a building. The duration is adjustable with options of 10, 60 seconds or 5 minutes (5 minutes default), although we can supply a latched relay (part number 010-0560) if you need the Siren to latch on until a member of staff turns it off.

Please Contact Us if you want to discuss the Latched Siren options (as we need to discuss the reset options).

This Siren can be replaced if required, the options include:

• Louder Wired Sirens.
• Buzzers.
• Bells.
• Wireless Sirens.
• Flashing LED's.
• Combination of Above.

Auto-Dialler:

You could also add a GSM or Landline Dialler for use out of hours, click here to view a suitable range of Diallers. 

Contact Us for Advice!! 

Operation:

When the Push Button is pressed, the Siren will be activated for the set duration or until a member of staff resets the Wireless Receiver.

• 1 x Large Red Push Button.
• 1 x S Transmitter & Mounting Box.
• 1 x Plug in Receiver.
• 1 x Plug in Transformer.
• 1 x Wired Siren.
• 2 x 19 ft Bell Cable. 

Wireless Receiver:

• Receiver Size: 6.2" x 4.2" x 1.5".
• Power Supply: 15v DC 1amp (plug in transformer).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Available Channels: 4.
• Max sets of Beams per Channel: 32.
• Maximum sets of Detectors per Receiver: 128.
• Output Voltage: 12v DC.
• Output Voltage Duration: 1, 10, 60 second & 5 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Wireless Working Range: 2700 ft (line of sight).

Wireless Transmitter:

• Wireless Range: 2700 ft (line of sight).
• Power Supply: 1 x MN21 12v Battery.
• Push Buttons: One.
• Frequency: 433 Mhz.
• Size: 3.5" x 1.5" x .5".
• Colour: White, Grey & Red Button.
• Optional Cable Connection: Yes.

Transmitter Mounting Box:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 6" x 3.5" x 3.5".

Siren Specification:

• Siren Level: 100 Decibel.
• Flashing Strobe: Yes.
• Size: 70 x 45 x 120mm.
• Cable: Twin (10 ft).
• Power Requirements: 12v DC.
• Colour: Red & White. 
• Internal & External.

Push Button Specification:

• Weather Protection: IP66.
• Connection: N/O.
• Base Footprint Size: 3.4" x 3.4". 
• Overall Height: 3.75".
• Diameter of Push Button: 3.75".
• Mounting Holes: 4x elongated integral.
• Mounting Flange: Snap-on Chassis.
• Cable Access: M20 Cable Glands (knock out).
• Seal: PVC.
• Contacts: Copper alloy/nickel silver.
• Operating Temperature: –10°C to +65°C.
• Termination: Screw & Clamp.