Pull Cord Switch Wireless SOS HY Solar Alarm

Pull Cord Wireless SOS Alarm:

• 1 x Battery powered Wireless Pull Cord Switch.
• 1 x Solar Powered Siren & Strobe.
• Ideal for Bathrooms, Washrooms & Toilets.
• Can be Expanded.
• Easy & Fast to Install.
• No Power Required.

How it Works::

This simple Alarm comprises of one Battery Powered Pull Cord & one Solar Powered Outdoor Siren Receivers which are paired together within a unique and secure wireless network.

If a Customer requires Help, they can Pull the Pull Cord (they will hear a buzzer from the pull cord), which will in turn trigger the Outdoor Sirens (additional Sirens & Pull Cords can be added).

No Power is required for the Installation !!

Solar Siren Receiver:

The Wireless Solar Siren is powered by a built in lithium battery which is charged and maintained by the top mounting Solar Panel. 

It has a built in 95 Decibel Siren & bright Flashing LED which can be programmed to operate for 3 minutes or 30 seconds upon activation.

Up to 16 Pull Cords (or other HY Sensors) can be used at the same time.

You could also add a unique Battery 4G Dialler (007-2000) to this Siren should you want Key-holders to be contacted in the event of an activation.

The Siren has tamper switches which would activate the Siren if they were attacked.

You can also add a Remote Control (005-6020) which allows you to Disarm the Siren at your discretion together with being able to use it as an additional Panic Button. 

Pull Cords:

The two Wireless Pull Cords:

• 2 x Pull Cords & Transmitters (typically used within Bathrooms).
• Wireless Transmission to all HY Receivers.
• Built in 80 Decibel Buzzer (user knows they have activated the Transmitter).
• Buzzer Duration: 30 seconds (or can be immediately turned off). 
• Battery Powered: 2 x AA Batteries (easy & quick to install).
• For use in Emergencies.

Wireless Operation:

The Wireless operational range between the Pull Cords & Solar Siren is 100 metre (line of sight) which equates to around 50 - 75 metres in most applications, however one or more signal Repeaters can be added which can massively extend this range, these include:

• Indoor Plug in Signal Repeater (005-0760).
• Outdoor Solar Siren & Repeater (005-6000) which can be used with or without the loud Siren.

Expandable:

This Pull Cord Alarm can be expanded to cover many different applications, these include:

• Additional Pull Cords (005-6470).
• Additional Indoor Siren Receivers (005-6400).
• Outdoor Solar Sirens (005-6000).
• Smoke & Heat Detectors (005-6050).
• Water Sensors (005-6440).
• Alarm Sensors (Door/Window Contacts & PIR's).

Please Contact Us if you have any Questions !!

• 1 x Battery Pull Cord Kit (005-6470).
• 1 x Solar Siren (005-6000).

Pull Cord:

• Built in Sound: Yes (80 dB).
• Sound Duration: Approximately 30 seconds (can be turned off before).
• Operating voltage: DC 3V (2 AA 1.5V batteries).
• Standby current: ≤5 µA.
• Alarm current: ≤50mA.
• Wireless frequency: 433.92 MHz.
• Wireless range: 100 meters (line of sight) which can be more than doubled using a signal repeater.
• Operating temperature: -10°C to 50°C.
• Operating humidity: ≤80%.
• SOS button dimensions: 3 3/8" x 3 3/8" (L × W).
• Length of trigger cord: 20".

Specification:

• Wireless: Yes.
• Wireless Range: 300 ft (line of sight).
• Power Supply: Built in Battery (2600 mAh 3.7v Lithium).
• Standby Time: 60 days (with no charging).
• Charging Method: Built in Solar Panel.
• Channels: 16.
• Channel Type:
• 12 x Normal (require remote control).
• 4 x 24 Hour (will operate the siren even in disarmed mode).
• Colour: White.
• Siren: 105 Decibel.
• Flashing LED's: Yes (when activated).
• Tamper Switch: Yes (lid and base).
• Remote Control Operation: Yes (up to 8 per Siren).
• Siren Duration: 30 seconds or 3 minutes.
• Size: 12" x 8.5" x 4".
• Fitting Method: Remove Lid, fix base to the wall using 3 x screws.
• Frequency: 433 MHz.
• Optional Output Relay: Yes N/O & N/C (operates for the duration of the Siren).