3600 ft S Range DA600+ Wireless Door Alert with Flashing LED

3600 ft Wireless DA600+ Door Alert with Blue Flashing LED designed to monitor a closed door being opened.

Supplied with a:

• 1 x Battery Powered Wireless Door Contact.
• 1 x 4 channel Wireless Receiver.
• 1 x Signal Repeater.
• 1 x Blue Flashing LED with 9 ft of Cable.

In the event of the Door being opened, the Internal Receiver will chime (adjustable volume) together with activating the Blue Flashing LED for a duration of 10 - 60 seconds or 5 minutes (or until reset on the receiver).

The LED is connected to the Receiver via 9 ft of Bell Cable, which can be lengthened upon request.

Additional Door Contacts can be added including the standard 900 ft model (004-2820) supplied within this kit or the long range 2000 ft Solar Powered model (004-3800).

Door Contact & Repeater:

This system is supplied with a Signal Repeater which increases the working range from 900 ft (line of sight) to 3600 ft (line of sight). The signal repeater is powered by a plug in transformer and needs to be fitted within 300 - 900 ft from the door contact.

The Signal Repeater needs to be fitted into an Internal location or inside a weatherproof container (not steel).

The Magnetic Door Contact is powered by 2 x AAA batteries which would last between 1 - 2 years in most applications.

They are fitted using double sided tape and a couple of small screws in some applications, and would be fitted onto a door and door frame in such a position that both parts are close to each other when the door is closed. The normal location would be on the top ledge about 1/3rd in from the hinge. 

Receiver:

The Indoor 4 - Channel Wireless Receiver is powered by a standard 2-pin Plug in Transformer and has the following features:

• 4 x Adjustable Dry Relay N/O or N/C Outputs (often used to trigger auto-diallers, timer relays).
• Adjustable 12v DC Outputs (often used with sirens & flashing lights).
• ON/OFF Switch.
• Volume Control.
• Will work with up to 128 sets of Sensors.
• Optional Reminder Bleeps.
• Exit Delay Option.

• 1 x Wireless 4 channel Receiver.
• 1 x Wireless Repeater.
• 2 x Power Supplies.
• 1 x Set of 900 ft Wireless Magnetic Contacts.
• 1 x Blue Flashing LED with 10 ft of Bell Cable.

Receiver:

• Receiver Size: 6.2" x 4.2" x 1.5".
• Power Supply: 15v DC 1amp (plug in transformer).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Available Channels: 4.
• Max sets of Sensors per Channel: 32.
• Maximum sets of Sensors per Receiver: 128.
• Output Voltage: 12v DC.
• Output Voltage Duration: 1, 10, 60 second & 5 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Wireless Working Range: 900 ft (line of sight).

Signal Repeater:

• Wireless Range: 2700 ft (line of sight).
• Power Supply: Plug in Transformer.
• Frequency: 433 Mhz.
• Size: 6.2" x 6.2" x 2.2".

Door Contact: 

• Size of Switch: 3.5" 1.2" x .5".
• Size of Magnet: 3.5" x .5" x .4".
• Installation Method: Double Sided Tape (supplied) & 2 x Screws (optional).
• Transmission Range: 900 ft (line of sight).
• Contact Distance: Approximately .5".
• Batteries: 2 x AAA Batteries.
• Battery Life: 1 - 2 years (depending on usage).

Flashing LED:

• Colour: Blue.
• Voltage: 9 - 12v DC.
• Diameter: 3".
• Depth: 2.2".
• Fixing Methods: Screws or Double Sided Tape (supplied).
• Cable Length: 10 ft.