Long Range (900 metre) Outdoor Wireless DA600+ Solar Powered PIR & Perimeter Beam

Long Range (2700 ft) Wireless Solar Powered DA600+ Outdoor Alarm System supplied with:

• 1 x Long Range 1B Perimeter Beam Set (can protect up to 300 ft between Beams).
• 1 x Long Range Wireless Solar Powered PIR.
• 1 x Solar Panel & Cable (allows you to fit the solar panel in a different direction or location of the PIR).
• 1 x Plug in 4-Channel Receiver.
• 2 x Remote Controls.

This is an example of how you can use both the Solar PIR's (900 or 600 metre models) together with any of the Solar Perimeter Beams (1B, 2B or 3B) to make an Outdoor Alarm System to suit your requirements (compatible with all DA600+ products).

You can also add may other accessories to the system (see list below).

Wireless Transmission Range:

The range between the PIR & 1B Beams to the Indoor Receiver is an impressive 2700 ft (line of sight) which equates to around 1000 - 2000 ft in most applications, this distance can be doubled by adding a Signal Repeater (004-2910).

Receiver:

The Indoor 4 - Channel Wireless Receiver is powered by a standard 2-pin U.S Plug in Transformer and has the following features:

• 4 x Adjustable Dry Relay N/O or N/C Outputs (often used to trigger auto-diallers, timer relays).
• Adjustable 12v DC Outputs (often used with sirens & flashing lights).
• ON/OFF Switch.
• Volume Control.
• 5 minute Exit Delay Possible: (using remote control or receiver).
• Will work with up to 128 sets of Detectors.
• Optional Reminder Bleeps.
• Exit Delay Option.

1B Beams:

These impressive Solar Powered Wireless Perimeter Beams are packed with impressive features (listed below) and work in conjunction with either of the Wireless Receivers (indoor 004-2790, 004-2880) & (solar outdoor 004-2810), perfect for protecting the outside of homes, farms & businesses:

• Battery Powered with Built in Solar Charging: (making for easy installation).
• Dual Detection Technology: (prevents false alarms from small animals and moving debris).
• 300 ft Detection: (covers more are with less detectors).
• Sensitivity Settings.
• Impressive 2700 ft Wireless Transmission Range: 
• Quality Build.
• Supplied with Wall & Pole Mounting Brackets.
• Test Lights: (for easy installation).
• Top up charging Ports.

The Dual Detection Technology works by having a pair of Detectors (set 60 mm apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by. There are a pair of detectors on each size of Beam, so these 1B-100 have one pair of detectors, a 2B-100 would have two pairs.  

The External Beams are also supplied with an additional Charging Port which can be used to give the Beams a boost charge should you experience a lengthy duration of low sun light, or perhaps one of the beams needs to be fitted into a slightly covered location. 

They are very easy to install as they have a built in Red Glow Light (for easy lining up).

You can use up to 128 sets of Beams & PIR's with the Internal Receiver & 32 sets with the Solar Wireless Siren, you can mix & match by using a selection of different sizes of Beams within one single system.

Wireless PIR:

The Detection range of the PIR is 60 ft (which can be reduced by choosing one of the other  three sensitivity settings) and the detection width is approximately 15 degrees but with a narrow depth.

By fitting the PIR about 3 - 6 ft from the ground, it is possible to avoid detecting small ground animals (providing you mount the PIR horizontal to the ground).

It is powered by a built in Battery which is charged and maintained by the Solar Panel supplied, this Solar Panel comes with its own mounting bracket and 3 ft of Cable which is plugged into the back of the PIR.

The benefit of having a separate Solar Panel is that it allows you to fit the PIR in the most suitable position for Detection whilst positioning the Solar Panel in the best location for daylight (to charge the PIR).

You could also connect a charger into the back of the PIR for locations with access to power, or use this port to give the PIR an occasional boost charge if it is mounted in a shady location.

The PIR is supplied with an easy to mount wall bracket.

Remote Controls:

The Remote Controls allow you to pause the Receiver for 5 minutes to allow you to leave the premises without activating the system (designed for use when there are Sirens, Bells & Auto-Diallers attached).

It also allows you to trigger the Receiver using it as a Panic Button (useful again when accessories are connected).

Additional Accessories:

You can add many additional accessories to this Driveway Alarm System building it to your specific applications, the wide range of options include the following, but there are many more:

• 900 metre PIR's.
• 600 metre PIR's.
• 1B Perimeter Beams.
• 2B Perimeter Beams.
• 3B Perimeter Beams.
• Wireless Receiver.
• Solar Siren.
• Signal Repeater.
• Wireless Solar Siren.
• Wired Siren.
• Wired Bell.
• Wired Adjustable Siren.
• Wired Buzzer.
• Wired Flashing LED.
• KP9 GSM Dialler.
• KP H/D GSM Dialler.

A unique Wireless Driveway Alarm System, if you need Advice Please Contact US for Friendly, No Obligation Advice !!

• 1 x Solar Powered 2700 ft Wireless PIR.
• 1 x Solar Powered 1B Perimeter Laser Beams.
• 1 x Solar Panel (for the PIR).
• 1 x 4 - Channel Wireless Receiver.
• 1 x U.S Plug in Transformer.
• 1 x Set of mounting Brackets.
• 2 x Remote Controls.

Receiver:

• Receiver Size: 6.2" x 4.2" x 1.5".
• Power Supply: 15v DC 1amp (plug in transformer).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Available Channels: 4.
• Max sets of Beams per Channel: 32.
• Maximum sets of Detectors per Receiver: 128.
• Output Voltage: 12v DC.
• Output Voltage Duration: 1, 10, 60 second & 5 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Wireless Working Range: Up to 2700 ft line of sight (depending on which sensor or beam is being used).

 Beams:

• Beam Size: 13.4" x 5" x 1.8".
• Power Supply: Re-chargeable Lithium Batteries.
• Charging Method: Built in Solar Panels.
• Mounting Methods: Wall or Pole.
• Detection Range: 300 ft.
• Transmission Range: 2700 ft (line of sight).
• Frequency: 433 Mhz.
• IP Rating: IP66.
• Distance Between Detection Beams: 2.2".
• Number of Beams: 1 set.
• Charging Port: 9 - 12v DC (500 m/A to 1 amp).

PIR:

• Power Supply: Built in 3.3v LiFEPO4 Battery (500 mAh).
• Charging Method: Separate Solar Panel.
• Wireless Range: 2700 ft (line of sight).
• Detection Range: 60 ft (adjustable).
• Detection Angle: 15 degrees.
• Size of PIR: 5" x 3.5" x 5".
• Size of Solar Panel with Bracket: 7.5" x 6" x 5".
• Frequency: 433 MHz.
• Working Temperature: -22 + 158 Fahrenheit.
• Solar Panel Output Current: 200mA (bright days).
• Sensitivity Settings: 3.
• Low Setting: Press ON/OFF Button 3 times to Turn ON.
• Medium Setting: Press ON/OFF Button 4 times to Turn ON.
• High Setting: Press ON/OFF Button 5 times to Turn ON.